Going back in... Cylinders and pistons time
#201
#202
Awesome thanks! Not to sound too dim witted, but are these covers that go on top of the current one with one center bolt and just fits on top, or would they replace the current one and screw into the 3 support posts and act as the filter holder?
#203
Originally Posted by robbyville
Awesome thanks! Not to sound too dim witted, but are these covers that go on top of the current one with one center bolt and just fits on top, or would they replace the current one and screw into the 3 support posts and act as the filter holder?
Edit: look at the photos MisfitJason posted a few pages back.
Last edited by Reindeer; 08-06-2017 at 11:01 AM.
#204
On top. That part holds the actual filter on
Here are some links to faceplates
https://www.sandiegocustoms.com/coll...cleaner-covers
Here are some links to faceplates
https://www.sandiegocustoms.com/coll...cleaner-covers
#205
Thanks guys. I looked at the SD customs covers but didn't see anything I liked much. May need to do something on my own if I can't get transparent since it fits on top of the current black one.
The center hole is threaded for a cover, I was just hoping that since it's just a flat piece of metal that if the 3 holes were standard spacing that maybe I could replace the whole thing with something similar to what I had before.
The center hole is threaded for a cover, I was just hoping that since it's just a flat piece of metal that if the 3 holes were standard spacing that maybe I could replace the whole thing with something similar to what I had before.
#206
#207
I reached out to the guy who did my timing cover (maple leaf), I was thinking of a US/Cdn flag together. But I also need to get some external breathers so not sure that I want to spend so much money on a custom cover. Now that I know what to look for kind of I'm going to search around. The cyclone one from HPI might work nicely and I could call them and see if they would be willing to charge me the difference from if I had ordered it all together vs. separately which is about $30
Thread
Thread Starter
Forum
Replies
Last Post