Pics?

 

I'll try to get some today while we're out and about...

 

These are just cell phone pics, but you get the idea. This is one of Jackyl's 2" tank lifts and spacerjim's 2" riser spacers.

 

hey man my bike is in the shop but my risers came in... but what size bolts and thread did you get to replace the stock bolts for the risers...

 

He beat me to the question about bolts......but do they include longer bolts with the spacers or are you on your own to find ones that fit?

 

Those are nice looking risers. Do they pull the bars back quite a bit? And did you have to change out the cables?

 

You have to find your own bolts. I just took one of the stockers to Home Depot and got some that were 2" longer. For my Fat Bob that was 1/2" X 5 1/2". The cables reached just fine. The clutch cable is a bit tight, I took off the upper cable clamp that holds the cable to the downtube. The spacers bring the bars back just a bit, not a ton. Obviously, they raise the bars 2", and since the risers angle back from there, they come back a little further. I notice the increased height of the bars more than increased pullback.

 

If you are talking about the riser extensions for the integrated ones on the Street Bob then you are talking about David at Loner Industries. I got mine from him and installed em' yesterday, pretty sweet deal cause there arent too many options for the street bob set up other than changing out the top tree. Ill post pics soon...

 

I need to get a set...is he still making them?