Last edit by: IB Advertising
Thug Style / Club Style Dyna pic's
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
Thug Style / Club Style Dyna pic's
eBay quarter fairing installed. For 100$ can't beat it. Came with the bung king style mounts for the 49mm front ends. Fit and finish is pretty good actually. Yes, it will be paint matched at some point. For now the black will do. Have to add a couple spacers below the headlight block to lift it a bit...
quality-wise it is solid, but i'm not sure how it would mount up to a fat bob front end. no reason it couldn't be made to work...
I'm sure with a little "massaging" it could be made to work, but that's the main reason why I haven't pulled the trigger.
It's been a minute since I was on this thread. Man, so many fantastic Dynas!
Still got a ways to go. Picking up a 2017 RK over the summer put a significant stall on the mods. But I'm happy...with both! Will be blacking out the front end, console, and strut covers over the winter. Also, "plan" to p/u a set of black rim Street Bob take-offs, and do a suspension overhaul.
Still got a ways to go. Picking up a 2017 RK over the summer put a significant stall on the mods. But I'm happy...with both! Will be blacking out the front end, console, and strut covers over the winter. Also, "plan" to p/u a set of black rim Street Bob take-offs, and do a suspension overhaul.
What height are those risers?
Have any of you guys with Leather Pros FXDXT bags powder coated the hardware? Does the added thickness of the powder coat cause any issues with the hardware and taking the bags on and off the bike?
No problems.
And although I've never adjusted mine, there is an adjustment that can be done that would I'm sure take care of any issues with PC thickness.
Do you mean the nuts and bolts and spacers or the actual brackets on the back of the bag itself? I spray epoxied mine and it was fine.