Does anyone know if the combination spedo/tach HD part #74774-11 will fit a 2011 fat bob

 

I don't know but I know that there was some major overall of the wiring with something call the HDLAN system. They have it on the very newest Softails, dunno about the other models.

A bit of an expensive try-it-and-see but if you do then be sure to let us know here because it is a good looking gauge.

 

A little research indicates that it's for the Soft Tails. I think that if you had the schematic for the bike it was intended for and the schematic for the bike it was going into you could 're-pin' the wiring plug as needed.

 

Been thinkin' about this gauge also when I first saw it online a couple of months ago. Definitely a nice looking speedo/tach combo, with a more affordable price than the other analog combos the MoCo offers. Wouldn't think it be too difficult for HD to offer the same unit for the pre-'011 bikes with the appropriate console opening....

 

odfatbob, try this:

part # 70900070 - spun al MPH, fits MY08 and later Road Kings, MY09 and later Dyna's with 5" gauge, and MY08 to MY10 Softail with 5" gauge

This gauge will fit your MY11 fatbob.

 

That will fit your 5" fat bob console, my buddy and I installed that gauge in his 10 super glide today. Its a neat combo, you plug it in first to a gray connector by the fuse block and it transfers your milage to the new gauge. I think the instuction sheet listed 600 color combinations, I like the digital fuel gauge that you chose if you want.

I wish I could install it on my 10 fxdwg but they only have the 5" gauge

 

Thanks guys. I bought one on Tuesday, and had it on the bike that night. It is an awesome unit. It has every color you can think of.

 

Post up some pix when you get in installed.

 

There was a thread about this the other day with pics and a nice write up:
https://www.hdforums.com/forum/dyna-...led-today.html

 

aha, I saw that one.........didn't realize it was the same one.