6 piston front caliper - master cylinder question
Former Sponsor
Joined: Aug 2005
Posts: 10,968
Likes: 54
So rear Pm calipers do not come in black ops I have discovered. Only black anodized or contrast cut.
I can do the front 6 piston calipers for $355 each for forum members. Led time depends on what you want. For reference, retail on these is $499 plus shipping and tax if you buy local. We are clsoed Satur5day so if you are ianterested or have questions email me hogpro@gmail.com Pm me, or call us when we are open (M-F 6am-6pm)
Pricing for the rear caliper is a tad more, but I cannot remember how much since I do not have my pricing guide here at home. Polish Hammer probably has the pricing I sent him for that.
I might just have to get a set for my Dyna now too. fOn a side not I was at a friends shop last night after work and my buddy has Pm 13" dual rotors and 6 piston calipers on his FXDXT. It is a sick setup but there was such a small amount of clearance between the fork leg and the mounting bolts that it took him a while to figure out how to shim to ensure that there was clearance. This was all due to the PM 13" rotors as I looked at my FXDXT and I had much more clearance with my Lyndall rotors.
Anyway in conjuction with steel braided lines and Lyndall pads you will have a one finger front braking solution.
I can do the front 6 piston calipers for $355 each for forum members. Led time depends on what you want. For reference, retail on these is $499 plus shipping and tax if you buy local. We are clsoed Satur5day so if you are ianterested or have questions email me hogpro@gmail.com Pm me, or call us when we are open (M-F 6am-6pm)
Pricing for the rear caliper is a tad more, but I cannot remember how much since I do not have my pricing guide here at home. Polish Hammer probably has the pricing I sent him for that.
I might just have to get a set for my Dyna now too. fOn a side not I was at a friends shop last night after work and my buddy has Pm 13" dual rotors and 6 piston calipers on his FXDXT. It is a sick setup but there was such a small amount of clearance between the fork leg and the mounting bolts that it took him a while to figure out how to shim to ensure that there was clearance. This was all due to the PM 13" rotors as I looked at my FXDXT and I had much more clearance with my Lyndall rotors.
Anyway in conjuction with steel braided lines and Lyndall pads you will have a one finger front braking solution.
Outstanding HDF Member
Joined: Nov 2007
Posts: 2,289
Likes: 22
From: Beautiful Downtown Burbank
I might just have to get a set for my Dyna now too. fOn a side not I was at a friends shop last night after work and my buddy has Pm 13" dual rotors and 6 piston calipers on his FXDXT. It is a sick setup but there was such a small amount of clearance between the fork leg and the mounting bolts that it took him a while to figure out how to shim to ensure that there was clearance. This was all due to the PM 13" rotors as I looked at my FXDXT and I had much more clearance with my Lyndall rotors.
Anyway in conjuction with steel braided lines and Lyndall pads you will have a one finger front braking solution.
Former Sponsor
Joined: Aug 2005
Posts: 10,968
Likes: 54
Yes they are. As long as your order from someone who knows what you need it will DBO. I can do these PM 6 pistons for $355 per caliper shipped in the ConUS for forum members. Hit me up and I can get some ordered for you.
If you want the 13" rotor version they are a little more.
If you want the 13" rotor version they are a little more.
Thread
Thread Starter
Forum
Replies
Last Post
Roadkill73
Frame/Suspension/Front End/Brakes
4
Jan 19, 2014 10:45 PM