2008 street bob
Thread Starter
|
Stage I
Joined: May 2014
Posts: 1
Likes: 0
From: crowville
2008 street bob
i have a 2008 street bob with paint peeling on the rear fender.wanting to buy a new fender and relocate the tailight and plate can anybody tell me the options i have or website to check? maybe what fenders from similar models fit
Tourer
Joined: Oct 2013
Posts: 344
Likes: 8
From: WMass
My 2010 is doing that around the taillight, and my 2008 the paint peeled off the whole fender.
Im looking for a full length rear fender for my SB, and it seems harder to find than I would have thought.
Chase
Im looking for a full length rear fender for my SB, and it seems harder to find than I would have thought.
Chase
Road Warrior
Joined: Dec 2010
Posts: 1,629
Likes: 46
From: East Hartford, CT
My 09 had rusty bubbles around the tail light and also around the front brackets.
I removed them ,cleaned, sanded primed and sold them on ebay, then purchased take offs in mint shape same vivid black from an 06 super glide and an 11 rear fender take off from a FXDB, it came with a new rear light and wire harness,
my bike looks brand new again.
The low rider ,super glide and streetbob all fit between 06 and 11.
I made sure to apply a couple coats of urithane clear coat on the back side of the fenders before installing for better protection.
I removed them ,cleaned, sanded primed and sold them on ebay, then purchased take offs in mint shape same vivid black from an 06 super glide and an 11 rear fender take off from a FXDB, it came with a new rear light and wire harness,
my bike looks brand new again.
The low rider ,super glide and streetbob all fit between 06 and 11.
I made sure to apply a couple coats of urithane clear coat on the back side of the fenders before installing for better protection.
Last edited by stilup; May 13, 2014 at 08:26 PM.
Thread
Thread Starter
Forum
Replies
Last Post