Dyna Glide Models Super Glide, Super Glide Sport, Super Glide Custom, Dyna Glide Convertible, Super Glide T-Sport, Dyna Glide Police, Dyna Switchback, Low Rider, Street Bob, Fat Bob and Wide Glide.
Sponsored by:
Sponsored by:

My 97 Dyna won't start after having the carb cleaned?

Thread Tools
 
Search this Thread
 
  #1  
Old 08-05-2014, 12:56 PM
leadsled70's Avatar
leadsled70
leadsled70 is offline
Novice
Thread Starter
Join Date: Aug 2010
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Default My 97 Dyna won't start after having the carb cleaned?

Hi all, have a little problem here. I just bought a 97 Lowrider from a coworker and need a little help. When I bought the bike the PO never rode it much if at all really. I think he bought it because his friends had one. So he has had the carb cleaned several times by the same shop. When I purchased the bike and took it for it's first ride the bike wouldn't stay running without the enricher **** pulled. I was on the road so no problem, I just locked the **** and rode it. Other than that it ran great, pulled like a horse. I figured the low speed circuit was clogged so I dropped it off at the same shop to have them clean it. Well after that the bike will not start now. It did once with the choke out and the throttle maxed. This I believe is what you do when your bike is " flooded ". I have spark at the plugs. I put in new plugs too. Gapped at.040. The bike has 15k on it. I also installed a Hyper charger too. It has V&H Down sweeps.
 
  #2  
Old 08-05-2014, 03:24 PM
brad75raiders's Avatar
brad75raiders
brad75raiders is offline
Road Warrior
Join Date: Aug 2007
Location: Oakdale Ca.
Posts: 1,498
Received 55 Likes on 49 Posts
Default

basic stuff first. Is the fuel on?
 
  #3  
Old 08-05-2014, 03:36 PM
maddghost's Avatar
maddghost
maddghost is offline
Ultimate HDF Member
Join Date: Apr 2008
Location: Out on Deranged
Posts: 5,384
Received 11 Likes on 9 Posts
Default

I've only had one carbed bike,and if the carb top is removed the cable comes out with the top a spring and a sleeve. If the sleeve doesn't go down exactly right it remains in full open throttle position and becomes very hard to start and once it does it jus sceams but won't idle down. So my point is make sure that shop put your carb back together right.

When you say dropped "it" off do you mean the carb or the whole bike? If a shop pulled your carb apart they should have made sure it ran before giving it back.

Do the little doors on the hyper charger open freely?

Why don't you just use carb cleaner to clean out the carb?
 
  #4  
Old 08-05-2014, 04:12 PM
Galaxie500fb's Avatar
Galaxie500fb
Galaxie500fb is offline
Advanced
Join Date: Jun 2014
Location: Massachusetts
Posts: 70
Likes: 0
Received 0 Likes on 0 Posts
Default

like a previous poster said. Check the basics. Evo`s are simple. Spark, fuel, air. Pull the air cleaner off and twist the throttle and check for squirts of fuel.
 
  #5  
Old 08-05-2014, 05:18 PM
Mars47's Avatar
Mars47
Mars47 is offline
Road Captain

Join Date: Apr 2011
Location: Grand Rapids, MI
Posts: 507
Received 9 Likes on 9 Posts
Default

Another simple answer; make sure the oring thingy is on the throttle body correctly; so theres no air getting in between the carb and throttle body.
 
  #6  
Old 08-07-2014, 08:26 AM
leadsled70's Avatar
leadsled70
leadsled70 is offline
Novice
Thread Starter
Join Date: Aug 2010
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks all for the help. As it turns out the shop I left my carb with forgot to put the low speed jet back in! They couldn't even find it...lol. Needless to say he put in a new one and cleaned it up again for me at no charge. I put it back on the bike and she runs like a champ. I usually do my own work but was swamped fixing a friends Buell so I took a chance.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Huskerdoo
Sportster Models
1
11-29-2016 03:05 PM
PyroPornStar
Exhaust System Topics
6
04-21-2013 06:57 AM
Benny70hemibird
Dyna Glide Models
7
03-14-2012 01:08 PM
Fat Boy Seabee
Softail Models
2
05-03-2011 11:56 PM
terrapin88
Dyna Glide Models
4
04-06-2010 11:17 AM



Quick Reply: My 97 Dyna won't start after having the carb cleaned?



All times are GMT -5. The time now is 12:26 PM.