Mark this thread as Unsold
Low Rider S Heavy Breather modified for external vent
#1
Low Rider S Heavy Breather modified for external vent
I'm selling my original Heavy Breather which came on my LRS, which I modified to vent the blowby to the atmosphere instead of back in the throttle body. It uses stainless barb fittings, and I sealed the internal vent tubes with set screws secured with red oil resistant loctite, and filled from the breather end with JB Weld. It only needs some hose clamps and one torx head bolt for the throttle body. Dealer or any ACE hardware should have it for a dime or so. The filter is in great shape, as is the entire kit, with one exception. I made a couple of nicks in the housing when I pried off the breather bolt covers. You don't see them when the caps are on, but they're there. A little touch up paint will make them disappear.
$150 delivered. PayPal only please. PM if interested.
$150 delivered. PayPal only please. PM if interested.
Thread
Thread Starter
Forum
Replies
Last Post