Mark this thread as Unsold
2 TBW Heavy Breather external vent AC's
#1
2 TBW Heavy Breather external vent AC's
I'm selling my original HD Heavy Breather which came on my LRS, (50mm TBW) which I modified to vent the blowby to the atmosphere instead of back in the throttle body. It uses stainless barb fittings, and I sealed the internal vent tubes with set screws secured with red oil resistant loctite, and filled from the breather end with JB Weld. It only needs some hose clamps and one torx head bolt for the throttle body. Dealer or any ACE hardware should have it for a dime or so. The filter is in great shape, as is the entire kit, with one exception. I made a couple of nicks in the housing when I pried off the breather bolt covers. You don't see them when the caps are on, but they're there. A little touch up paint will make them disappear.
$150 delivered. PayPal only please. PM if interested.
Both sold.
Also selling a chrome version that I bought from FuelMoto for my 2016 Road Glide Special (50mm TBW). Same external venting method. This one came with a throttle servo shield. Has a little scratching on the elbow. No idea how the hell I let that happen, but it's not noticible beyond 2 feet away. Will include the same red filter as the black version, just not shown in the photo.
Same price - $150 obo delivered.
$150 delivered. PayPal only please. PM if interested.
Both sold.
Also selling a chrome version that I bought from FuelMoto for my 2016 Road Glide Special (50mm TBW). Same external venting method. This one came with a throttle servo shield. Has a little scratching on the elbow. No idea how the hell I let that happen, but it's not noticible beyond 2 feet away. Will include the same red filter as the black version, just not shown in the photo.
Same price - $150 obo delivered.
Last edited by Mchad; 07-30-2017 at 04:06 PM.
Thread
Thread Starter
Forum
Replies
Last Post