Sliding down the slippery slope - 107 build
#31
Russell is a very good tuner, and he has tuned some of our combo's in the past with great results.
With a good set of Heads, a Wood 8 or S&S .585(Target64 on this message board) will show even more.
Scott
With a good set of Heads, a Wood 8 or S&S .585(Target64 on this message board) will show even more.
Scott
__________________
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
#32
Yes, Russell's a great guy, I've got nothing but good things to say about him. When I brought him my bike for the build I asked him if it could be done in short order as I had a motorcycle event to attend. Even though he was going out of town for a long weekend he managed to get my bike built and tuned before he left. From what I've read people come from far and wide to have him work his magic. Very happy with the results.
Thread
Thread Starter
Forum
Replies
Last Post
Fat11Lo
Engine Mechanical Topics
41
09-13-2017 12:08 PM