Torque wrench?
#1
Torque wrench?
My apologies in advance if this has been covered recently/frequently, but I am wanting to get a foot-pound torque wrench to do some occasional tinkering on my bike. I know they go from Harbor Freight to Snap-on and perhaps beyond. What should a person expect to pay for a serviceable wrench and what are good brands? Thanks, JD
#2
Like everything else it comes down to how much you want to spend. Ive used Snap On, Mac, and Matco digital ones. I borrowed them from a friend when I was putting my motor together.
The big thing is that they are calibrated correctly. If it says 20 ftlbs, it is.
For me, I like the ones that click when you reach the set value.
If you are not using it all the time, get one that you can afford and take it some where and make sure it is calibrated correctly. Store it correctly and you should be fine.
Someone recently posted a link to a craftsman that was on sale. Home Depot and Lowes sell decent ones also
The big thing is that they are calibrated correctly. If it says 20 ftlbs, it is.
For me, I like the ones that click when you reach the set value.
If you are not using it all the time, get one that you can afford and take it some where and make sure it is calibrated correctly. Store it correctly and you should be fine.
Someone recently posted a link to a craftsman that was on sale. Home Depot and Lowes sell decent ones also
#3
#4
Join Date: Sep 2017
Location: 36.4279047 & -86.80480 or thereabout
Posts: 21,636
Received 32,998 Likes
on
12,901 Posts
The tool truck brands are probably a little excessive in price for what you're doing. Sears brand would be fine. I like the click type, app they have served Generations well.
Get it calibrated or do it yourself. Don't use it after dropping on the concrete without calibrating again. Use 90* extensions if need be or do the math if you're lengthening the arm to compensate. Some people purporting to be mechanics don't know that.
The inch pound I have came from o'Reilly's. My foot pound is a matco. When it clicks stop torquing. And don't believe anyone that says they can feel how much torque there is without a torque wrench
Get it calibrated or do it yourself. Don't use it after dropping on the concrete without calibrating again. Use 90* extensions if need be or do the math if you're lengthening the arm to compensate. Some people purporting to be mechanics don't know that.
The inch pound I have came from o'Reilly's. My foot pound is a matco. When it clicks stop torquing. And don't believe anyone that says they can feel how much torque there is without a torque wrench
#5
Join Date: Jan 2011
Location: Southeast Michigan 15 Minutes East Of Hell
Posts: 147,688
Received 47,832 Likes
on
18,582 Posts
#6
Don't get one from from Harbor Freight. I've made this mistake. Was doing a top end rebuild on my Toyota, trying to torque the head down. While doing so I kept saying to myself...thus doesn't feel right. But hey i was using a torque wrench, triple checked I had it set correct. then....SNAP. there goes my head bolt.
Find something with a happy medium. High end stuff like snap on matco, mac, etc is probably overkill unless your using it frequently. I went with Craftsman and haven't had any issues. Digital click type. I have 3/8 and 1/2.
Find something with a happy medium. High end stuff like snap on matco, mac, etc is probably overkill unless your using it frequently. I went with Craftsman and haven't had any issues. Digital click type. I have 3/8 and 1/2.
#7
Trending Topics
#8
Matco 3/8" drive for $295 vs the Pittsburgh model from Harbor Freight for $20 for a DIY guy working on a Harley TC motor? Come on, no brainer. Check out the attached article from a few years back When Car Craft tested several torque wrenches for accuracy.
http://blog.harborfreight.com/car-cr...torque-wrench/
http://blog.harborfreight.com/car-cr...torque-wrench/
Last edited by djl; 10-27-2017 at 02:33 PM.
#9
#10
you do know that head bolts fail?!? even brand new ones!!! if it is a critical fastener, do not get junk!!!
the hf wrench is actually pretty good but like all clickers, the accuracy is mid scale and sags low/high. beam is pretty good especially in the inch/pounds but a strain gauge is probably the best but $$$$$.
sears is closing stores left and right so i do not know if craftsman will hang but for now, you can get online cheaper.
yes, you can calibrate at how with a known weight.
the hf wrench is actually pretty good but like all clickers, the accuracy is mid scale and sags low/high. beam is pretty good especially in the inch/pounds but a strain gauge is probably the best but $$$$$.
sears is closing stores left and right so i do not know if craftsman will hang but for now, you can get online cheaper.
yes, you can calibrate at how with a known weight.