What does it take to hit 120hp
#1
08-13-2018, 07:17 PM
Join Date: Aug 2018
Location: Pennsylvania
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
What does it take to hit 120hp
I got a 103. I’m buying a 110” big bore. Hammer head performance “Smash” heads. 58mm throttle body (brand in the air) 5.3 injectors, 585 cams, hydraulic lifters, pushrods, still thinking of a fueling chest and pump cause they claim 3hp gain I know it’s not a lot for 700$ but 3hp gained is a gain. But with that setup is it possible to hit my 120 goal if not what else do I gotta get to hit me number
#3
08-13-2018, 07:49 PM
Seasoned HDF Member
You only looking for a peak number, or a broad usable torque curve? I would recommend going to Fuel Moto’s website and looking at their dyno charts. Their level b heads, 107 kit and a proper cam choice should get you there with a good tune.
Last edited by FNGonaRK; 08-13-2018 at 07:52 PM.
#6
08-13-2018, 08:59 PM
The following 2 users liked this post by hdgeno777:
2wheelwanderer (08-15-2018),
Jack Ryan (08-13-2018)
#7
08-13-2018, 09:04 PM
Trending Topics
#9
08-13-2018, 10:03 PM
Join Date: Aug 2018
Location: Pennsylvania
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
#10
08-13-2018, 10:05 PM
Join Date: Aug 2018
Location: Pennsylvania
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
well uts gonna be 110 with comparable head work just different people still around 800. But like I said 585 already ordered I’ll be mad if I don’t hit that number even with a 58mm and injectors