Wego file
#21
#22
#23
Thanks guys, I'm glad to hear that. Actually that run was with my Fatcat pipe. The RB prostock is out getting jet hot coated. I guess you might be wondering what jetting I used to get those readings. I got a 33 intermediate, 140 airbleed and a 66 main. The mixture screw is adjusted to where I got the best idle, idle is 1000 rpm + or - a few rpm. Thanks again guys, If I was able to take y'all for a beer I would.
#24
#25
#26
#27
#28
Thanks again guys, I really appreciate all your help and input. I'm going to try my hardest and leave it alone until winter. Now I can ride and enjoy!! It only took me a little over a year since I first sent it to Scott. One major tear down, heads off twice, time to put the tools away for a while....woohoo!!!
#29
Thanks again guys, I really appreciate all your help and input. I'm going to try my hardest and leave it alone until winter. Now I can ride and enjoy!! It only took me a little over a year since I first sent it to Scott. One major tear down, heads off twice, time to put the tools away for a while....woohoo!!!
#30
Thread
Thread Starter
Forum
Replies
Last Post