Ok does it look like this

https://www.ebay.com/itm/11508765806...6a156a54882589

 

Ok Thats Not a fuse it's a circuit.breaker
It will click when going off and when it cools off it will click / turn back on.
You need to find out which breaker is tripping (turning itself off) to trace down where a short is.
Either in a component or in the wire. Know ALL things that breaker feeds would be a big help to you and whoever is trying to help

WP

 

T h e top one is clicking and now the bottom three are getting warm with the switch on and I have no lights at all.Ill take a good look in my service manual and see what it says about what breaker does what

 

Damn, don't people clean their things any more? That's a lot of crud and corrosion. I have a 93 Softail and my stuff doesn't look that bad. No wonder bikes have electrical failures.
Anyway, with that many lighting problems you might want to look towards changing the control module right after cleaning all those plugs and circuit breaker contacts. Don't know if there's a way to check it other than trying a known good one.

 

Breakers can get warm when in use. But shouldn't make ya move a finger real quik.
Dang that's not easy to explain

WP

 

I'm beginning to believe it is the ignition switch itself....those wires are getting warm and so it the harness. I have looked in my service manual and the breakers that are going of are for the ignition and the Acc. Hey I'm a plumber by trade so what I work with and electricity doesn't mix well so I'm not real good with electrical things...thanks everybody

 

Your post is a bit confusing, are the turn signals now working correctly?

The problem now is the aux lamps (spot) will not come on, correct?