I would like to change the cams and lifters in my 2009 Ultra Classic while keeping the stock push rods. The engine has 30K miles on it.
Is there a gasket kit(s) that includes any and all gaskets, o'rings etc that I will need to do this job?
Cometic and CYCO both sell cam service kits that will include all the gaskets and o-rings necessary plus a couple that you may not use. Cometic kit PN is C9664 and will run about $55, plus shipping. Don't know the CYCO cam service kit PN but that kit will cost about half what the Cometic kit costs.
Upgrade the inner cam bearings as part of the upgrade.