How's the S&S 110 upgrade kit for 96"
#11
11-23-2017, 03:57 AM
I just made an offer on the basic 110" kit from the same vendor cvaria got his goodies from, so we'll see what happens. I have a new set of WFO Larry's Stage 2 heads and a set of Cycle Rama 575 cams, Hylift Johnson lifters, and Smith Brothers pushrods that I'll match them up with. A good tune should get me 120/120 at a bare minimum. Might have the stock throttle body/intake worked over as well.....
Last edited by martinj; 11-23-2017 at 03:59 AM.
The following users liked this post:
cvaria (11-23-2017)
#12
11-23-2017, 06:47 AM
Extreme HDF Member
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,344
Received 2,189 Likes
on
1,677 Posts
I just made an offer on the basic 110" kit from the same vendor cvaria got his goodies from, so we'll see what happens. I have a new set of WFO Larry's Stage 2 heads and a set of Cycle Rama 575 cams, Hylift Johnson lifters, and Smith Brothers pushrods that I'll match them up with. A good tune should get me 120/120 at a bare minimum. Might have the stock throttle body/intake worked over as well.....
so that's twice now...
You cringe at "headwork & custom stuff" and yet you got headwork, but from S&S?! Ummm.....what? You could have done far better for less than those S&S heads.....which aren't bad. I guess if you feel better that S&S has their name behind it, then sure. But you did just do what you cringed about....FYI.
you don't agree with/like what i did, to my bike, think i could have done better, or don't understand why i did what i did (especially if you don't do your own work) ? ...IDRGA* and it's none of my business really. FYI
Happy Thanksgiving, Jive Turkey!
Last edited by cvaria; 11-23-2017 at 08:56 AM.
#13
11-23-2017, 02:31 PM
The following users liked this post:
cvaria (11-23-2017)
Thread
Thread Starter
Forum
Replies
Last Post