2005 FXDWGI 103 motor swap
#1
2005 FXDWGI 103 motor swap
I have a 2005 FXDWGI that I’ve put a 103 TC from a 2013 dyna in. It’s starts and runs after some tuning but sometimes I’ll go to start it and it will idle to about 2200 rpm’s. I’ve replaced and tested the iac but the iac still isn’t working properly. I’m stumped appreciate any help
Thread
Thread Starter
Forum
Replies
Last Post
ElectraHead
Primary/Transmission/Driveline/Clutch
0
08-24-2012 07:47 AM