Let's see your non-stock rear pulleys!
#1
10-29-2011, 09:41 AM
Let's see your non-stock rear pulleys!
Mine is still stock, so I'm still in the thinking stage...
#3
10-29-2011, 10:20 AM
Club Member
I got rid of mine. Everytime I got off the bike and looked at it, it was just sitting there not doing anything.
#4
10-29-2011, 10:36 AM
Stellar HDF Member
I used new chromed grade eight bolts, re-tapped the hub threads, cleaned all of the threads with electrical contact cleaner, applied red loc-tite , torqued to 60 ft lbs, and no problems since.
Some info from other threads below, click on the blue arrow to see the whole thread.
Some info from other threads below, click on the blue arrow to see the whole thread.
#6
10-29-2011, 12:15 PM
Elite HDF Member
I got ride of the stock pulley, put on one from Performance Machine, then actually got rid of the pulley entirely and went to a sprocket.
Trending Topics
The following users liked this post:
WS6 Formula (09-06-2017)
#9
10-29-2011, 12:26 PM
Road Master
Join Date: Oct 2010
Location: Farmington, MN
Posts: 879
Likes: 0
Received 0 Likes
on
0 Posts
