TTS Mastertune Information
#5742
The black TTS box support has stopped. The only support given now is for the Blue TTS box.
All of the software will work on the Blue Box but not all of the software will work on the Black Box. Loosing support doesn't' mean the Black Box won't work anymore, it just will not have some of the same functions as the Blue. As long as you use the new MT9 calibration the black TTS dongle will work completely with VTune 3. You just can't use Flight Recorder with it
My bet is... when the next software release comes out that the manual information will be for the Blue and Green boxes only. Thus... the Black Box isn't supported. It's like Windows XP isn't supported by Microsnot anymore but it still works with most of today's software programs.
Last edited by Mr. Wizard; 02-09-2015 at 07:29 PM.
#5743
#5744
Join Date: Jan 2014
Location: Auckland, New Zealand
Posts: 108
Likes: 0
Received 16 Likes
on
7 Posts
The following users liked this post:
S3rider (06-06-2020)
#5745
#5746
To test your theory...
Enrichen the VE's in the far two left columns from 750 to 2000 RPM by 5%. Ride and check for decel pop at 1500. If it is still there, do another 5% enrichment.
If that doesn't do it then you can work with the DE tables or warm timing tables.
What you are trying to do is upset the fuel or timing adjustment at 1500 RPM decel. One of these things should create that for you unless there is a mechanical problem such as an exhaust leak sucking in cold air during decel.
Enrichen the VE's in the far two left columns from 750 to 2000 RPM by 5%. Ride and check for decel pop at 1500. If it is still there, do another 5% enrichment.
If that doesn't do it then you can work with the DE tables or warm timing tables.
What you are trying to do is upset the fuel or timing adjustment at 1500 RPM decel. One of these things should create that for you unless there is a mechanical problem such as an exhaust leak sucking in cold air during decel.
#5750