Touring Models / 2024+ Center-Cooled Touring Models    Today 02:01 AM

My bike is at the dealership now for the coil/wire issue. Said it would be two weeks before the parts will be here. And my brake flush wrench came on too. But otherwise bikes been fine.

0 Reply

Harley Davidson Tech & Mechanical Forum / Primary/Transmission/Driveline/Clutch    Today 01:51 AM

Use The Tranny. It gives you much more control of the bike.

0 Reply

Harley Davidson Motorcycles / Custom Models    Today 01:26 AM

papagotwheels
https://cimg9.ibsrv.net/gimg/www.hdforums.com-vbulletin/2000x1504/c8cb155c_ba45_401c_9 531_5dfd860c43f3_496 8f11665898691bea357b e9ef34223e16ec12d.jp g
Suggestion time, got all that room behind the trans, stuff a custom battery box down in there and go with a round oil tank, that frame really is not configured to take a horseshoe tank and you'll...

0 Reply

HD Engines / Twin Cam Motors    Today 01:06 AM

Biker4life#1 I have moved this thread to the Twin Cam Motors section as you will get better responses in this section (was in the Livewire section)

0 Reply

Classic / Shovelhead    Today 01:04 AM

Clean the stud threads and holes thoroughly, bore brush & brake clean, you can stuff a light rag or the blue shop paper towels in under to catch the crap. High heat red loctite 263. Set them to the...

0 Reply

Classic / Shovelhead    Today 12:47 AM

Probably have 70lbs of the factory Hitachi starters in various states of f*cked, bulk of them brushes cooked down so far the finger spring lands on the brush holder, no pressure on the brushes and...

0 Reply
Finallygotmeahog's Avatar
Finallygotmeahog
Thread Starter

Harley Davidson Motorcycles / Dyna Glide Models    Today 12:45 AM

So been a biker since I was 14. And finally got me an American torque twin. I have newb questions. First any recommendations on how to change the steering stem lock without a key? Second carb...

0 Reply

Classic / Shovelhead    Today 12:40 AM

chizzler
I didn't replace the sprockets. They're worn but still have a little life left in them. To replace the rear you have to machine it off the hub and weld on a new one. I put it all back together with...
That move cut the new chain's life by about 1/2, but I understand why you did it. I've turned down work because of those enclosed chain systems, won't touch one I know it was gonna be fubar.

0 Reply

Harley Davidson Motorcycles / Classic    Today 12:30 AM

HellaGNARLY
Sister in law's ex husband passed away and I got his parts pile. He had a '59 Pan so at first I was hoping it was off that. I guess I could get a good idea from the shaft lenght too? The things that...
Main shaftis a no go, case has the ears for the 70 & up aluminum primary, safe bet most the rest of the bikes a creative frankenbuild. What bearings did the counter shaft cluster have? Loose or...

0 Reply

Harley Davidson Motorcycles / General Harley Davidson Chat    Today 12:25 AM

all this crap started a few years ago and whoever the genius running the show at harley joined the party. they went woke and this is what happened. call it anything you like, invent some new...

0 Reply

All times are GMT -5. The time now is 02:52 AM.