'99-'06 SE203 cams - NEW
#1
'99-'06 SE203 cams - NEW - "SOLD!"
New in Box one set of SE203 cams and the cam installation kit listed including bearings, gaskets and, O-rings. $200 w/free shipping to lower 48.
If you have a '99-'01 Touring model and would like a SE air filter I'll throw in a brand new one, complete as pictured below, for another $25
Part # 25937-99B
Specifications:
Lift @ valve Intake/ Exhaust:(.510”/.483”)
Duration @ .053 Intake/ Exhaust:(234°/239°)
Timing @ .053 lift Open/Close:
(Intake: 18° BTDC/36°ABDC
Exhaust: 42°BBDC/17°ATDC)
TDC Lift @ valve int/exh: (0.178”/.152”)* Theoretical based on rocker arm ratio of 1.65. Valve train components, operation temperature and tolorence stack-up will affect actual lifts.
Performance cam kit designed to provide exceptional low and mid-range torque. These cams are also used in the S.E. Stage II EFI Kits. For Race Application.Performance Cams for Twin Cam 88™ Equipped models. Kits include front and rear cams. Splined rear cam is included for exceptional load handling capability.
Gaskets and bearings not included. Dealer installation is recommended, and special tools are required for proper installation. Please purchase Cam Installation Kit P/N 17045-99A which contains all required gaskets, bearings, and seals for proper installation. For proper cam gear spacing, Cam Spacer Kit P/N 25938-00 is recommended. This kit contains an assortment of five different spacers to achieve proper sprocket alignment. Individual spacers can be purchased separately. 99 models require splined Cam Sprocket P/N 25716-99 for installation. For race application only.
If you have a '99-'01 Touring model and would like a SE air filter I'll throw in a brand new one, complete as pictured below, for another $25
Part # 25937-99B
Specifications:
Lift @ valve Intake/ Exhaust:(.510”/.483”)
Duration @ .053 Intake/ Exhaust:(234°/239°)
Timing @ .053 lift Open/Close:
(Intake: 18° BTDC/36°ABDC
Exhaust: 42°BBDC/17°ATDC)
TDC Lift @ valve int/exh: (0.178”/.152”)* Theoretical based on rocker arm ratio of 1.65. Valve train components, operation temperature and tolorence stack-up will affect actual lifts.
Performance cam kit designed to provide exceptional low and mid-range torque. These cams are also used in the S.E. Stage II EFI Kits. For Race Application.Performance Cams for Twin Cam 88™ Equipped models. Kits include front and rear cams. Splined rear cam is included for exceptional load handling capability.
Gaskets and bearings not included. Dealer installation is recommended, and special tools are required for proper installation. Please purchase Cam Installation Kit P/N 17045-99A which contains all required gaskets, bearings, and seals for proper installation. For proper cam gear spacing, Cam Spacer Kit P/N 25938-00 is recommended. This kit contains an assortment of five different spacers to achieve proper sprocket alignment. Individual spacers can be purchased separately. 99 models require splined Cam Sprocket P/N 25716-99 for installation. For race application only.
Last edited by sniper77; 02-02-2009 at 07:09 AM.
#2
Thread
Thread Starter
Forum
Replies
Last Post
jorswift
Motorcycle Parts For Sale-Misc. Parts
10
05-10-2010 07:36 AM