Clutch Kit
#1
Clutch Kit
I'm about to replace the clutch plates on my bike due to high mileage and a bit of slippage. \\;I have a '99 Ultra that puts out about 95 HP and 105 ft. lbs. \\;My plan is to use the Barnett Kevlar extra plate kit that has \\;9 steel plates and \\;10 \\;friction plates, and also use a SE diaphragm spring. \\;
 \\;
There are a few things I'm unsure of whether or not I'll need to replace such as the damper spring seat (37883-98) and the damper spring (37884-98). \\;Are these wear items that I should replace, or maybe do the extra plates in the kit replace these items? \\;Also, is the pressure plate (37912-98) that goes on the outside of the discs a wear item that should be replaced?
 \\;
Thanks.
 \\;
There are a few things I'm unsure of whether or not I'll need to replace such as the damper spring seat (37883-98) and the damper spring (37884-98). \\;Are these wear items that I should replace, or maybe do the extra plates in the kit replace these items? \\;Also, is the pressure plate (37912-98) that goes on the outside of the discs a wear item that should be replaced?
 \\;
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
RoadKingKamchi
Touring Models
3
08-02-2012 10:17 AM