82 wide glide bobber build
#301
Not a 4LS but this is the look I was hoping for to minimize the look of it having front brakes at all, yet still have something better than dragging my feet to stop the bike. Then I went down the 4LS path....Yes the 10" rotors are pretty much the same as the 4LS in size and its the easier path with the rotors.
#302
Join Date: Apr 2010
Location: Long Island, New York
Posts: 7,843
Received 5,033 Likes
on
2,612 Posts
If you are going to use the fork shrouds as shown on that bike, I could work without the nacelle. So many choices:
https://www.lowbrowcustoms.com/39mm-...raw-steel.html
https://www.lowbrowcustoms.com/39mm-...raw-steel.html
#303
If you are going to use the fork shrouds as shown on that bike, I could work without the nacelle. So many choices:
https://www.lowbrowcustoms.com/39mm-...raw-steel.html
https://www.lowbrowcustoms.com/39mm-...raw-steel.html
#304
Join Date: Apr 2010
Location: Long Island, New York
Posts: 7,843
Received 5,033 Likes
on
2,612 Posts
#305
#306
#307
Probably doesn't look much different but it is! Ive trimmed a lot of excess metal off and worked more on the compound curves which are a royal pain. Its a constant back and forth because one curve will take another curve out and you need to work in a specific direction. Then there's additional metal there that needs to be folded around the framework once Im happy with how it fits and looks.
#308
#309
#310