cast wheels for 82 FLH
#11
there was a guy on here did some work on a 1982 FLHS which had the spoked wheels plus a few other things were different to an flh such as rear brake pedal etc etc
just look up posts from him and you will see what you have
https://www.hdforums.com/forum/shove...les-today.html
just look up posts from him and you will see what you have
https://www.hdforums.com/forum/shove...les-today.html
#12
The following users liked this post:
rockher_man (04-21-2020)
#13
The following users liked this post:
rockher_man (05-18-2020)
#14
You guys helped out. I learned allot in the last few days. Front and back are the same unless you run a dbl disc on the front. My problem was some of these cast wheels have part numbers and most don't. And everyone on EBAY tells me " Yeah, this fits your bike". I found one locally that worked, ( But I wanted to put my hands on it to measure and check it out before I bought it.) Now I'm searching for one for the front.
The following users liked this post:
rockher_man (04-21-2020)
#15
Join Date: Aug 2013
Location: Western Oakland County Michigan
Posts: 125
Received 33 Likes
on
26 Posts
Just sorted some 16 spoke turbines on my 77 glide (single disc). Both wheels are the same, larger studs for the sprocket on the rear. Same size disc bolts front and rear with a small chrome hubcap covering the larger holes on the front.
parts book is confusing for fx wheels, so can’t answer for them
HTH- jon
parts book is confusing for fx wheels, so can’t answer for them
HTH- jon
Is there a part number on that hubcap?
#16
The following users liked this post:
rockher_man (04-21-2020)
#17
Thread
Thread Starter
Forum
Replies
Last Post
Krankin Ken
Frame/Suspension/Front End/Brakes
0
02-13-2008 02:33 PM