When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
old post new question.....
does the vent box just come off with two screws and pull back away from the inner fairing? or is it trickier than that? I put the painted slipstream vent on but now decided to get the whole thing painted... it just looks out of place.
I added a chrome front, and painted the inner all flat black above the damper, and gloss black below it. The flat is to prevent reflections from the LEDs I added inside the vent, just behind the chrome part, and the gloss is to reflect them (which is what you see.) Works pretty good, I've got the 3-pouch thing and you hardly see any light from the seat.
I'm going to eventually get some of that black reflective tape and put a strip just behind the chrome piece for added effect. It's switched so I can shut them off if need be.
Hey, nice job on the hydro dip, I really like that, too, especially on the inside.
Last edited by Oogie Wa Wa; Dec 2, 2016 at 11:23 PM.
