Touring Models Road King, Road King Custom, Road King Classic, Road Glide, Street Glide, Electra Glide, Electra Glide Classic, and Electra Glide Ultra Classic bikes.
Sponsored by:
Sponsored by:

What did you do to your bagger today?

Thread Tools
 
Search this Thread
 
Old May 6, 2017 | 06:34 AM
  #10451  
GRWHD's Avatar
GRWHD
Road Warrior
5 Year Member
Liked
Loved
Community Favorite
Joined: Jun 2016
Posts: 1,751
Likes: 263
From: Catalina AZ
Default

The radio started shutting off one to two times on each ride
So I ordered a marine radio with blue tooth (no CD).
I don't use the CB or the Sirus stuff anyhow...
I have a bunch of music on my phone, so lotsa


Not only will I have a bunch of room I will be loosing a bunch of weight. I need to weight that factory brick.


whats behind that red paint.


side shot


Lotsa room light weight to

Now i gotta post up the radio for sale.
I know there was a couple people talking about sirus radio & another about the CB.
This unit had/has both...
As long as everything goes right after work (and the gun show) I will get her back together today...
 
Old May 6, 2017 | 08:38 AM
  #10452  
checkers's Avatar
checkers
Ultimate HDF Member
Joined: Jan 2009
Posts: 5,016
Likes: 277
From: East Tn Foot of The Dragon
Default

Installed a Sunpie 7" LED projector headlight with metal adaptor ring. Good light, but now headlight sticks forward from nacelle 3/8", looks odd. OEM bucket was removed to use adaptor ring. Headlight is of good quality and workmanship. Very bright. I have not ridden at night with regard to light pattern etc.
 
Old May 6, 2017 | 08:45 AM
  #10453  
Ben221's Avatar
Ben221
Road Warrior
Joined: Dec 2012
Posts: 1,686
Likes: 242
From: Glen Mills, PA
Default

New Lyndall front brakes last week and have them almost broke in. This week I cleaned my nasty oily SE filter, pulled the plugs to check the gaps and condition. Plugs were damn near perfect at almost 15k. Cleaned them a little, antiseized and reinstalled.

I really need need to do the breather bypass soon.
 
Old May 6, 2017 | 11:13 AM
  #10454  
chevy454454's Avatar
chevy454454
Intermediate
Joined: Jan 2015
Posts: 30
Likes: 1
From: long island ny
Default

Installed ram phone mount
 
Old May 6, 2017 | 06:45 PM
  #10455  
Uncle Fuzzy's Avatar
Uncle Fuzzy
Road Captain
Joined: Oct 2016
Posts: 654
Likes: 67
From: PacificNorthWest
Default

Didn't all happen today..but from chasing valve train noises from my recent cam upgrade to Andrews 48s which turned into a head port (don't ask..) I installed Rockouts and drilled the return holes, replaced the head breathers and readjusted the pushrods to .145. Valve train noise is definitely reduced from what it was. Cam reversion is the same, although I did the seafoam combustion chamber clean and changed the oil to Spectro Heavy Duty Golden 20w-50 and it did seem to reduce the valve train noise even more.
I've been playing around with paint correction methods and I'm going to finish that up tomorrow(thanks to eaglefan1 for all his advice).
That and a Baker Attitude adjuster is on deck and then I'm done with wrenching on this thing for the season..
Finally time to ride..
 
Old May 7, 2017 | 12:23 PM
  #10456  
sponger's Avatar
sponger
Road Master
Joined: Sep 2015
Posts: 1,168
Likes: 79
From: so cal
Default

Originally Posted by Beretta52
Just added the extended/stretched 4.5" saddlebags from Advan Black.




Now u just need an Arlen Ness rear fender extension and it will look complete.
 
Old May 7, 2017 | 02:20 PM
  #10457  
ajnigli's Avatar
ajnigli
Tourer
Joined: Feb 2017
Posts: 379
Likes: 102
From: Illinois
Default

Did a few upgrades to the bike this past week. Installed a new battery, Red led rear turn signals, smoked amber led front turn signals, Custom Dynamics Smart Triple play module with load equalizer, Signal Dynamics headlight modulator and wired the passing lamps to run will using high beam. Rear is brighter now so I am extra pleased about that.
 

Last edited by ajnigli; May 7, 2017 at 02:48 PM.
Old May 7, 2017 | 03:49 PM
  #10458  
Uncle Fuzzy's Avatar
Uncle Fuzzy
Road Captain
Joined: Oct 2016
Posts: 654
Likes: 67
From: PacificNorthWest
Default

Originally Posted by Uncle Fuzzy
Didn't all happen today..but from chasing valve train noises from my recent cam upgrade to Andrews 48s which turned into a head port (don't ask..) I installed Rockouts and drilled the return holes, replaced the head breathers and readjusted the pushrods to .145. Valve train noise is definitely reduced from what it was. Cam reversion is the same, although I did the seafoam combustion chamber clean and changed the oil to Spectro Heavy Duty Golden 20w-50 and it did seem to reduce the valve train noise even more.
I've been playing around with paint correction methods and I'm going to finish that up tomorrow(thanks to eaglefan1 for all his advice).
That and a Baker Attitude adjuster is on deck and then I'm done with wrenching on this thing for the season..
Finally time to ride..




Didn't get the paint cut the way I wanted. Need a different machine, but that's for next winter (along with chrome fork lowers)
It's good enough for this season.
Time to ride
 
Old May 7, 2017 | 05:00 PM
  #10459  
patriot2500's Avatar
patriot2500
Road Master
10 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Jun 2012
Posts: 975
Likes: 14
From: Bayville, NJ
Default

Had it out yesterday for my club's Cigar Night, where it got rained and pollen'd on. Then took it out today for an annual bike blessing and to a family party. Came home and ordered a Hammock Seat for it. Can't wait to get it and replace the Badlander that's on there.
 

Last edited by patriot2500; May 7, 2017 at 06:08 PM.
Old May 7, 2017 | 06:09 PM
  #10460  
RickW3's Avatar
RickW3
Cruiser
Joined: Jun 2016
Posts: 140
Likes: 6
From: Metrowest
Default

Installed my LRS 16" windshield and floorboard relocation brackets today. Now just need to get some nice weather to test them out. By the way, light tint on the windshield looks sweet. A slight bit darker than the Harley light tinted.
 



All times are GMT -5. The time now is 04:19 AM.