Harbor Freight table measurement
#1
Harbor Freight table measurement
Hello team Evo,
A few years ago I moved and misplaced the trap door to the red motorcycle table lift. Would somebody please measure it and post it up? I'm guessing it is easier to buy a sheet of diamond plate and cut it versus calling hf and trying to buy it there.
Obviously I can measure the hole myself but I think it was oversized. Longer or wider??
Tia!
A few years ago I moved and misplaced the trap door to the red motorcycle table lift. Would somebody please measure it and post it up? I'm guessing it is easier to buy a sheet of diamond plate and cut it versus calling hf and trying to buy it there.
Obviously I can measure the hole myself but I think it was oversized. Longer or wider??
Tia!
#3
Last edited by GalvTexGuy; 04-28-2024 at 09:49 AM.
#4
The following 2 users liked this post by yellowstone kelly:
Paintslinger16 (04-28-2024),
Tee&Vee (04-28-2024)
#5
#6
#8
GalvTexGuy is correct. There are "lips" that it sits on and it's flush with the rest of the table top.
You can see the three lips on this end of the hole, there's another lip across the other end of the hole.
My cover for the hole measures 29 15/16 long by exactly 11 inches wide.
You can see the three lips on this end of the hole, there's another lip across the other end of the hole.
My cover for the hole measures 29 15/16 long by exactly 11 inches wide.
I love the Evo sub forum. It's the best!
Thank you,
Tom
The following 2 users liked this post by Tee&Vee:
TwiZted Biker (05-05-2024),
yellowstone kelly (04-30-2024)
#9
The following users liked this post:
yellowstone kelly (04-30-2024)
#10
Mine doesn't have the lips, lol....
I looked at a few of the other pics on this forum and the random web pics, it looks like some of them are actually oversized. This thing was like $299 with a coupon 13 years ago so it's been a good investment. So I think that I'll start with a slightly larger piece versus trying to make a perfect piece.
always something, right?!?!