"Bitchin Rocker" Chrome inner primary/grips pics
#1
"Bitchin Rocker" Chrome inner primary/grips pics
Just installed chrome inner primary "cover"
and chrome impaler flame grips.
Inner Primary cover was a little tricky...had to modify it a little.
Coming Soon: New pegs, clutch and front brake levers. Installed
chrome rear master cylinder cover, but no pics yet.
and chrome impaler flame grips.
Inner Primary cover was a little tricky...had to modify it a little.
Coming Soon: New pegs, clutch and front brake levers. Installed
chrome rear master cylinder cover, but no pics yet.
Last edited by RockerDave; 02-05-2009 at 07:27 PM.
#2
#3
You are correct, the grips are much easier to change than
to install the inner primary cover. Actually, the rear section
of the primary cover does not fit the rocker (do to the oil tank)
unless you modify it. Took me a couple of hours to get i to fit.
Once I got it installed, I realized that my Kuryakyn shifter linkage
did not fit anymore. So, I started modifying again. What I thought
would take me maybe an hour or so took me about 6 hours.
Inner primary cover, grips, chrome rear master cylinder cover and
modifying shifter linkage.
Sorry, I don't know what you are referring to when you asked about
the "control boxes". Maybe you mean the switch covers? If so, then
those are HD switch covers and I got them from my local stealer.
#7
Trending Topics
#10
Are you saying HD offers two covers or another vendor?
Do you have the part # for the Rocker?
RockerDave - Bike looks great!