Rocker c/ Breakout conversion
Thread Starter
|
Cruiser
Joined: Feb 2013
Posts: 103
Likes: 2
From: Citronelle, AL
update!!!!!on conversion
I know a few people have sent me PM's asking questions about the Breakout triple trees I put on my bike and I have warned everyone that asked. The trees will touch the tank and scratch or make a small dent in the tank because the stretch tank of a Rocker. So with that being said unless you want to change your seat, tank, console, speedometer mount, risers, and your handlebars, I would order the HHI wide glide trees for the Rocker to avoid this situation. Again, with that being said, I am in the middle of changing all of that.
I got a tank off of ebay for $155.00.A heartland side-mount tag with light on ebay for $140 brand new. A Heartland Rocker kit for $1250(brand new with passenger seat/sissy bar!!!! couldn't believe that deal that's over $3000 worth)Got Breakout riser and speedo clamp of ebay for $70. Putting new set of Carlini bag drag bars on with CVO console, vent lines and emblems. Also got a new unpainted Breakout oil tank off ebay for $200, because I wanted to put it custom painted like the rest of the tins. (If anyone wants to buy my chrome Rocker one PM me). Vivid Dragon has my tins now putting Willie G Negative flame paint job on for me. Jake at Heartland (awesome guy) took in my seat I didn't even buy from him and gave me full credit towards a Breakout model out of their new breakout conversion kit, and had Danny Gray put custom flame stitching with gator inlay. I'm going to post some pics of what things are looking like now and will update them as bike gets completed.
I got a tank off of ebay for $155.00.A heartland side-mount tag with light on ebay for $140 brand new. A Heartland Rocker kit for $1250(brand new with passenger seat/sissy bar!!!! couldn't believe that deal that's over $3000 worth)Got Breakout riser and speedo clamp of ebay for $70. Putting new set of Carlini bag drag bars on with CVO console, vent lines and emblems. Also got a new unpainted Breakout oil tank off ebay for $200, because I wanted to put it custom painted like the rest of the tins. (If anyone wants to buy my chrome Rocker one PM me). Vivid Dragon has my tins now putting Willie G Negative flame paint job on for me. Jake at Heartland (awesome guy) took in my seat I didn't even buy from him and gave me full credit towards a Breakout model out of their new breakout conversion kit, and had Danny Gray put custom flame stitching with gator inlay. I'm going to post some pics of what things are looking like now and will update them as bike gets completed.
Last edited by jtj75; Jan 20, 2014 at 02:36 PM.
Road Master
Joined: Nov 2009
Posts: 852
Likes: 5
From: Virginia Beach, VA
Conversion is almost complete, just have to mount front headlamp. Turned out better than I imagined. I could not have made it look like this without the help of this forum. I put CVO Breakout wide glide front end on my bike(everything above fork sliders), wheels tires, mirrors, and custom painted front Breakout fender. Then chromed out everything I could. Thanks again to all who post on this forum, it has been so much help.
Thread Starter
|
Cruiser
Joined: Feb 2013
Posts: 103
Likes: 2
From: Citronelle, AL
Thanks guys!!! looking forward to seeing the final product. Rodzilla my bike may not look like a Rocker anymore, but it will always be Rocker at heart. While I was changing the appearance, I went ahead and changed the performance too!!! I put screamin eagle 103 heads, 204 cams, supertuner, screamin eagle 103 stage 1 kit, and a chrome inner primary. Now when I get my tins back I will finally be done!!!! totally no more mods!!! for now . LOL!!!!
