Easiest Install Ever - HD 4" LCD Tach/Speedo
#1
Easiest Install Ever - HD 4" LCD Tach/Speedo
Doesn't get any easier then plug and play.
1) Remove two torx bolts
2) Unplug wiring harness
3) Remove tach/speedo
4) Remove rubber gasket and place on new tach/speedo
5) Install new tach/speedo
6) Plug wiring harness back in
7) Replace two torx bolts
To change colors etc, just follow the simple instructions. You can switch the LCD screen color, RPM color and needle color to over 600 color options. Oh, and you don't need a separate fuel sender unit/sensor either.
1) Remove two torx bolts
2) Unplug wiring harness
3) Remove tach/speedo
4) Remove rubber gasket and place on new tach/speedo
5) Install new tach/speedo
6) Plug wiring harness back in
7) Replace two torx bolts
To change colors etc, just follow the simple instructions. You can switch the LCD screen color, RPM color and needle color to over 600 color options. Oh, and you don't need a separate fuel sender unit/sensor either.
#5
Yes, it's actually easier to read then the stock tach/speedo. The stock unit showed the MPH with the needle and had the RPM's in the LCD portion. This unit is opposite. RPM's use the dial and LCD shows MPH.
#7
Trending Topics
#8
#10