Alloy Arts rear footpegs on a Breakout
#1
Alloy Arts rear footpegs on a Breakout
So I picked these up because I had some SMT Assassins on the back and they were just WAY too big...these blend in perfect...wouldnt even know they are there until I folded them out. Look GREAT!!! They have a bit of surface so I think the Hammer will like them better than the chrome spikes that were on there as I bet there is less "slippage" LOL
Now the bad...they dont ship with a bolt so you gotta hit your local small hardware store to track one down (3/8 x 16 for those that dont know...course thread...) I initially was looking for a chrome bolt but all my local joint had was flat black which in all honesty looks better than chrome I would bet!! The only other thing is that no matter how tight I get them they can still move back and forth a bit which is unnerving for me...thinking maybe I need to throw a few washers on it to see if that stops it from floating as I assume it will eventually allow the bolts to back out. I used blue loctite so hopefully they stay put!
Now the bad...they dont ship with a bolt so you gotta hit your local small hardware store to track one down (3/8 x 16 for those that dont know...course thread...) I initially was looking for a chrome bolt but all my local joint had was flat black which in all honesty looks better than chrome I would bet!! The only other thing is that no matter how tight I get them they can still move back and forth a bit which is unnerving for me...thinking maybe I need to throw a few washers on it to see if that stops it from floating as I assume it will eventually allow the bolts to back out. I used blue loctite so hopefully they stay put!
#2
Thread
Thread Starter
Forum
Replies
Last Post