Road King 2002 FLHRCI cam tensioners
#311
So as I have informed already.
some parts have just arrived to the garage.
up graded breathers with nice short bolts - this shall make the job easier.
I will also replace both of the rocker box sealings - from what I have heard, the original HD ones are working very well and pricewise they are same as the aftermarket ones.
so there will be more to come within 4 months more or less... just waiting for a good weather
some parts have just arrived to the garage.
up graded breathers with nice short bolts - this shall make the job easier.
I will also replace both of the rocker box sealings - from what I have heard, the original HD ones are working very well and pricewise they are same as the aftermarket ones.
so there will be more to come within 4 months more or less... just waiting for a good weather
#312
The following 4 users liked this post by hattitude:
brakeless (12-13-2022),
HarleyHappy (12-16-2022),
Highway Handler (12-13-2022),
orzel_man (12-13-2022)
#313
#314
Basically the same cam chest except:
They use the bigger inner cam bearings (B-168), they have the cam plate with a bushing (no roller bearings), and they come OEM with the hydraulic tensioners and roller chains.... so no need to upgrade the tensioners/chains...
However..... I've been inside the cam chest on one 96" and two 103" Twin Cams to upgrade to better cams.... That's always fun.....
Last edited by hattitude; 12-15-2022 at 05:44 PM.
#315
#316
Just coming back to this subject
Finally the weather is better here, and I took out the bike for a spin.
there was no oil coming out from the inside of the cylinder heads. Looks nice and clean there.
I took it to my garage and cleaned it up very carefully. will have to observe it more. if it will be dry I will most probably not take out the rocker boxes.
if it works... it works.
Finally the weather is better here, and I took out the bike for a spin.
there was no oil coming out from the inside of the cylinder heads. Looks nice and clean there.
I took it to my garage and cleaned it up very carefully. will have to observe it more. if it will be dry I will most probably not take out the rocker boxes.
if it works... it works.
The following 3 users liked this post by orzel_man:
Thread
Thread Starter
Forum
Replies
Last Post