Light hookup plug
Thread Starter
|
Seasoned HDF Member
Joined: May 2006
Posts: 6,500
Likes: 332
From: Blue Grass (KY)
Light hookup plug
I just installed the license plate bracket with the aux lights.....it has a long wire with the 4 prong plug, but only two wires in the plug....directions state to plug into the four plug Duschue (spelling) plug under the seat..I removed the seat, didn't see anything, removed the right side cover and there is a plug that the tail light plug will fit into. however when plug into this plug, the lights don't work.....main blake light still worked, but not the aux lights....
Is there another plug I should be looking for?????
Thanks All
Bike is 2007 Classic
Is there another plug I should be looking for?????
Thanks All
Bike is 2007 Classic
Road Warrior
Joined: Nov 2006
Posts: 1,738
Likes: 7
From: St. Charles, IL
RE: Light hookup plug
You plugged it into the diagnostic port for the ECU.
The plug may be used already if you have the LED spoilers or the trunk may have used it. It should be right in front of the battery
The plug may be used already if you have the LED spoilers or the trunk may have used it. It should be right in front of the battery
Thread
Thread Starter
Forum
Replies
Last Post
papapuskit
Ignition/Tuner/ECM/Fuel Injection
2
Feb 11, 2008 02:08 PM
