Stock Hub Offsets

Reply Subscribe

Thread Tools

Search this Thread

Dec 11, 2008 | 08:30 AM

Hog Yild

Thread Starter

Road Master

Joined: Jul 2006

Posts: 886

Likes: 4

From: Virginia

Stock Hub Offsets

Can someone provide the following information on the stock rear hub of the 00 to 08 FLHT's:

Pulley flange to center of rim

Rotor flange to center of rim

Dec 12, 2008 | 08:15 AM

Hog Yild

Thread Starter

Road Master

Joined: Jul 2006

Posts: 886

Likes: 4

From: Virginia

Bump.....

Dec 12, 2008 | 06:55 PM

FastHarley

Former Sponsor

Joined: Apr 2007

Posts: 5,360

Likes: 453

From: Davie, FL

Quote:

Originally Posted by Hog Yild

Bump.....

Pulley flange to center of rim: 82.664 mm/3.254" (not to the edge of the pulley register as that is 4.724/0.186")
Rotor flange to center of rim:78.778/3.101" (not to the edge of the rotor register as that is 4.724/0.186")

Dec 12, 2008 | 08:59 PM

Hog Yild

Thread Starter

Road Master

Joined: Jul 2006

Posts: 886

Likes: 4

From: Virginia

Quote:

Originally Posted by FastHarley

Pulley flange to center of rim: 82.664 mm/3.254" (not to the edge of the pulley register as that is 4.724/0.186")
Rotor flange to center of rim:78.778/3.101" (not to the edge of the rotor register as that is 4.724/0.186")

Hey FastHarley,

That's what I'm looking for. Thank you!

Last edited by Hog Yild; Dec 12, 2008 at 09:02 PM.