If I wanted to do the 103" Kit, how much am I talking with labor?

 

Please, I was wonderig the same thing.


?????

 

It seems to range from about $1500.00 to $1800.00 depending on your dealer. mine was $1590.00 (I think)

 

JMO But I had the "kit" installed at the dealer and if I had it to do over I'd take it to an indy and have them bore the cases and BUILD the engine rather that assemble a kit. I think the kit is around $1600 and they charged 6 hrs labor. BUT thats only a small part of a correctly built engine

 

Stage II with 255 cams. 899.95 - 25% off sale $675
Labor $800
then there's a couple of odds and ends parts and an ECM flash about $250

Total is around $1700. At least that's what was quoted me.

 

When I did my 103 I gathered all the parts (103 Kit-eBay $420, SE Heads, Adjustable Push Rods I already had the Cams) and had a HD Mechanic friend and myself do it in my Garage, Total Approx $1500 for a 103 Stage III

 

Mine was about $2400, but that included almost a grand for an exhaust system. At an indy shop. I highly recommend a good indy as moco has to build a more compliant engine at least they do here in CA. I did some comparisons before I did mine and the most I could get from the dealer was about 92hp and about 94 tq.

 

What is a realistic HP/TQ expectation from adding the kit?

 

I paid $680 labor here in Huntington Beach, CA at an independent.

 

mid 80's to low 90's hp and some where north of 100 tq with stock heads