Screamin’ Eagle Hydraulic Cam Chain Tensioner Plate Upgrade Kit
Stage II
Joined: Apr 2009
Posts: 2
Likes: 0
what i would like to know is did you guys change the bearings while you where in there and if you did , did anyone buy the bearing tool and cam lock to install gear drive, and what did it all cost because now you have to take the top end apart to get the cams out.thanks
Road Master
Joined: Jul 2008
Posts: 1,142
Likes: 7
From: Michigan
Nah just a favor for a friend, thats all 
And Drew, yes did change the bearings while in there. Cam came with new outer bearing, and i purchased Timken inner bearings to replace the stock.
And Drew, yes did change the bearings while in there. Cam came with new outer bearing, and i purchased Timken inner bearings to replace the stock.
Thread Starter
|
Road Warrior
Joined: Jan 2006
Posts: 1,808
Likes: 0
From: Waynesville, NC
Just wanted to say thank you for all of the input here. After a lot of thinking, reading, talking, reading more, and some more thinking, I ordered the Screamin’ Eagle Hydraulic Cam Chain Tensioner Plate Upgrade Kit this morning to go with my new cams from Head Quarter HQ-0034.
Road Master
Joined: Jul 2008
Posts: 1,142
Likes: 7
From: Michigan
I got the call letting me know my bike was ready...HQ-0034 cam installed, proper PCIII map from jamie installed, and the Hydraulic Cam Tensioner upgrade installed. (oh yeah, BlackOps Lifters from HQ as well), and wouldn't you know it...it snowed last night. Typical michigan weather i guess. As long as it warms up a bit and most of the snow melts i can go get it, but was really looking forward to some butt dyno time this past weekend!
Thread Starter
|
Road Warrior
Joined: Jan 2006
Posts: 1,808
Likes: 0
From: Waynesville, NC
I got the call letting me know my bike was ready...HQ-0034 cam installed, proper PCIII map from jamie installed, and the Hydraulic Cam Tensioner upgrade installed. (oh yeah, BlackOps Lifters from HQ as well), and wouldn't you know it...it snowed last night. Typical michigan weather i guess. As long as it warms up a bit and most of the snow melts i can go get it, but was really looking forward to some butt dyno time this past weekend!
I would like to hear what you think about it once you can get out to ride it.
Road Master
Joined: Jul 2008
Posts: 1,142
Likes: 7
From: Michigan
I'll definately post my opinion once i can put some miles on it. I'll also post some pics of the tensioners once i get all the parts back as well. Now if i can only find someone that wants to buy a stock 88" cam
Advanced
Joined: Mar 2008
Posts: 72
Likes: 0
From: Colorado
HDR, I am getting ready to do this conversion on my '02 EG. Where did you get the kit from and did it have everything you needed? I am looking at the Andrews 26N for cams. Plan on doing the work myself with help from a friend. We rode on New Year's day here in Colorado but it was 60* here.
