Damn.... I just looked again at that one, and it's for fuel or oil lines (5/16 ~ 3/8"). That's WAY too big for throttle cables.

I knew I had looked harder than that!

Now, the 7~8mm plug wire looms are looking more "right".

 

OK HERE

 

That "looks" like what I'm looking for, but the holes are too large diameter. THat is for 5/16 ~ 3/8" hose, not cable (or brake hose). You could put three (3) throttle cables in ONE of those holes.

 

Aren't those braided/coated lines in the pic larger than stock, in diameter?

 

Also found:

http://www.customizedchoppers.com/Cable%20Accessories/

http://www.legendmcs.com/custom-chro...tings-new.html

 

Take up the slack in the holes with this!

 

The braided brake hose is slightly larger diameter than the stock metal tubing, but not much bigger than the throttle cables ~ way smaller than fuel or oil lines.

___________________


On YOUR bike!

Even though they are listed under cable management, if you drill down into the 3 hole unit, it's actually the same fuel/oil line clamp that shows up on all the other sites.