This is a first. First time bike owner 07' RD king classic ( I know big first bike ) but I took the rider safty class,then took add on rider class.

First post too: My problem changed handel bars to heritage bars didn't need to add wiring ,now have no start (won"t crank over)
Any ideas, I have shop manual like to fix myself

Thanks Mike

 

Pinched wire

 

Kill Switch? Either pinched or have you checked you didn't switch it over whilst doing the bars?

 

"I found it ", I had grabed my spare alarm key fob & it must have a low battery in it .

 

Surprised your alarm didn't tell you where the problem was then...

 

I like when folks post what the problem was.So often you never hear what the cause was.