Harley Davidson Forums

Touring Models Road King, Road King Custom, Road King Classic, Road Glide, Street Glide, Electra Glide, Electra Glide Classic, and Electra Glide Ultra Classic bikes.
Sponsored by:
Sponsored by:

Adding the GPS mount from the 2010 Limited CVO Ultra

Thread Tools
 
Search this Thread
 
  #51  
Old 06-03-2010, 08:10 PM
honkerdown's Avatar
honkerdown
honkerdown is offline
Tourer
Join Date: Apr 2009
Location: Shrewsbury, PA
Posts: 274
Likes: 0
Received 0 Likes on 0 Posts
Default
I am very interested in this as well, I will have to see if it works with my Garmin Nuvu 265. Thanks for taking the time to post up the info. Don
 
Reply Like
  #52  
Old 06-04-2010, 12:38 PM
Chicago Spike's Avatar
Chicago Spike
Chicago Spike is offline
Road Warrior
Thread Starter
Join Date: Nov 2006
Location: St. Charles, IL
Posts: 1,738
Likes: 0
Received 7 Likes on 4 Posts
Default
Originally Posted by Airborne350G
Depends on the Nuvi mount. This mount accepts a mount that has four screws to scre to the base. I am 90% sure that a 550 mount will also work with this one as it also mounts using the same four screws.
I am 100% sure the 550 and 450 will work. I've seen pictures of the 550 on this same mount
 
Reply Like
  #53  
Old 06-05-2010, 11:39 AM
AbnMP13's Avatar
AbnMP13
AbnMP13 is offline
Tourer
Join Date: May 2010
Location: Carthage, MS
Posts: 478
Likes: 0
Received 0 Likes on 0 Posts
Default
Does this mount only work with the dash pad?
 
Reply Like
  #54  
Old 06-05-2010, 11:44 AM
Chicago Spike's Avatar
Chicago Spike
Chicago Spike is offline
Road Warrior
Thread Starter
Join Date: Nov 2006
Location: St. Charles, IL
Posts: 1,738
Likes: 0
Received 7 Likes on 4 Posts
Default
Originally Posted by AbnMP13
Does this mount only work with the dash pad?
Yes, there is a seperate mount that does not use the dash pad for either the 550 or 660;
http://www.harley-davidson.com/gma/g...bmLocale=en_US
http://www.harley-davidson.com/gma/g...bmLocale=en_US
 
Reply Like
  #55  
Old 06-05-2010, 08:38 PM
AbnMP13's Avatar
AbnMP13
AbnMP13 is offline
Tourer
Join Date: May 2010
Location: Carthage, MS
Posts: 478
Likes: 0
Received 0 Likes on 0 Posts
Default
Originally Posted by CSMHOG

3) Does the unit connect to the HK HD radio from under the fairing as well? I’d like to keep all my wiring hidden, otherwise, this whole project is off the table.

According to the pics yes; I was wondering the same thing.
 
Reply Like
  #56  
Old 06-05-2010, 09:38 PM
Buzzsaw's Avatar
Buzzsaw
Buzzsaw is offline
Road Captain
Join Date: Nov 2007
Location: MD
Posts: 544
Likes: 0
Received 0 Likes on 0 Posts
Default
Originally Posted by Chicago Spike
I am adding the 2010 CVO Limited Ultra Zumo mount to my 2009 Ultra. It mounts through the dash pad and all the parts are easily ordered through any HD dealer with these part numbers;
1106 Screw
1107 Screw
7686 Locknuts (2)
92346-10 Mount (accepts garmin cradle)
92466-10 Retainer (goes inside fairing for support)
57885-10 Pad (dashpad specific to cradle mount, already has holes)

This will make for a much cleaner look and get the ugly mount arms off your handlebars.
I am taking lots of pictures to add to this and should be done with the mounting tomorrow afternoon and I will finish this thread after that.

Was looking through the thread and after looking up the part numbers, does this parts list include the Chrome Trim for the Dashpad, or did you use the trim from your previous one? If you did reuse that portion, do you have that part# also for those of us that don't have a dashpad yet?

Thanks for the Great write-up and pics..
 
Reply Like
  #57  
Old 06-05-2010, 09:43 PM
CSMHOG's Avatar
CSMHOG
CSMHOG is offline
Outstanding HDF Member
Join Date: Nov 2008
Location: FL
Posts: 2,425
Received 281 Likes on 177 Posts
Default
The part # he gave was for the dash pad which had the pre-formed holes for mounting the zumo. I already have the original dash pad without the pre-formed holes, I'm going to modify mine to fit the zumo.

Here's the part # again.

With pre-formed holes: 57885-10

Without: 58262-05
 
Reply Like
  #58  
Old 06-05-2010, 09:58 PM
Chicago Spike's Avatar
Chicago Spike
Chicago Spike is offline
Road Warrior
Thread Starter
Join Date: Nov 2006
Location: St. Charles, IL
Posts: 1,738
Likes: 0
Received 7 Likes on 4 Posts
Default
Originally Posted by Buzzsaw
Was looking through the thread and after looking up the part numbers, does this parts list include the Chrome Trim for the Dashpad, or did you use the trim from your previous one? If you did reuse that portion, do you have that part# also for those of us that don't have a dashpad yet?

Thanks for the Great write-up and pics..
You're welcome, I used the chrome trim from my dash pad, just 2 bolts hold it to the dash pad. Here is the HD part number for that;

57842-06 Trim, dash pad
 
Reply Like
  #59  
Old 06-08-2010, 11:06 AM
acftgrunt's Avatar
acftgrunt
acftgrunt is offline
Cruiser
Join Date: Nov 2008
Location: Anderson, SC
Posts: 235
Received 0 Likes on 0 Posts
Default
Chicago Spike when you ordered the new dash pad did it come with new hardware? Currently I don't have a dash pad so for those of us that want to do this will we need more hardware?
 
Reply Like
  #60  
Old 06-08-2010, 11:49 AM
Chicago Spike's Avatar
Chicago Spike
Chicago Spike is offline
Road Warrior
Thread Starter
Join Date: Nov 2006
Location: St. Charles, IL
Posts: 1,738
Likes: 0
Received 7 Likes on 4 Posts
Default
No, as usual you need to buy the screws/bolts seperately. Here are the part numbers from my book;
3652 Screw, 2 needed
6837M Washer, 2 needed
Above 2 hold dash pad to fairing

4569 Screw, 2 needed hold chrome trim to dash pad
 
Reply Like



Advanced Search
Quick Reply: Adding the GPS mount from the 2010 Limited CVO Ultra


Reply Closed Thread Share
Forum Jump

All times are GMT -5. The time now is 03:07 AM.