What did you do to your bagger today?
09-16-2021, 08:49 PM
Stellar HDF Member
The following users liked this post:
longrideshields-2 (09-16-2021)
09-16-2021, 11:20 PM
Premium Sponsor
Added a new windshield and trim kit.
Long Ride Shields
Stingray Recurve Windshield w/ the Raptor Windshield Trim Kit
Long Ride Shields
Stingray Recurve Windshield w/ the Raptor Windshield Trim Kit
Last edited by longrideshields-2; 09-16-2021 at 11:30 PM.
The following users liked this post:
Oil, Gas & Leather (09-19-2021)
09-16-2021, 11:21 PM
Premium Sponsor
Windshield Detailer
Stingray Windshield w/ The Raptor Windshield Trim Kit
Windshield Detailer
Cleaned a customers windshield.
Last edited by longrideshields-2; 09-16-2021 at 11:38 PM.
The following users liked this post:
Bhrees (09-18-2021)
09-17-2021, 08:47 AM
Stellar HDF Member
Join Date: Jan 2019
Location: Mostly Florida, some Michigan
Posts: 2,595
Received 1,750 Likes
on
883 Posts
It's a little cheaper from Dennis Kirk.
09-17-2021, 12:35 PM
09-17-2021, 12:37 PM
Reworked and upgraded the front lighting. Two weeks ago I installed a knock off daymaker and passing lamp set. The passing lights were ok, but headlight was horrible.
I removed the headlight and installed a Sealight M2 LED bulb in the stock reflector.
Installed bright LED inserts in turn signals. White running light, then the white turns off when the Amber flashes. I did have to install a pair of load resistors .
Replaced the fender tip light bulb with LED
I removed the headlight and installed a Sealight M2 LED bulb in the stock reflector.
Installed bright LED inserts in turn signals. White running light, then the white turns off when the Amber flashes. I did have to install a pair of load resistors .
Replaced the fender tip light bulb with LED
The following users liked this post:
Bhrees (09-18-2021)
09-17-2021, 05:59 PM
Stellar HDF Member
Join Date: Jan 2019
Location: Mostly Florida, some Michigan
Posts: 2,595
Received 1,750 Likes
on
883 Posts
I agree, it is stupid expensive, but I looked at it as cheaper than repairing an tour pack lid.
The following users liked this post:
cyclone65 (09-17-2021)
09-17-2021, 08:22 PM
Cruiser
09-17-2021, 10:52 PM
+1, Been very satisfied with mine.
09-18-2021, 08:48 AM
Intermediate
Yes, they are from Amazon and are for bullet style lights. I made mounting adapters from some scrap plastic and glued them with clear silicone RTV . (some packaging waste, it looks like plastic cardboard) I’ve seen this stuff in white, but I had this black handy.
I bought Chris product smoke lenses (USA and inexpensive) for the conversion.
Mounted the load resistors on the back of the headlight bucket.
(if you have bullet lights, no homemade mounting adapters needed)
Insert with homemade adapter set in place. These are actually for the rear (lights up red)
I bought Chris product smoke lenses (USA and inexpensive) for the conversion.
Mounted the load resistors on the back of the headlight bucket.
(if you have bullet lights, no homemade mounting adapters needed)
Insert with homemade adapter set in place. These are actually for the rear (lights up red)
Last edited by Max Effort; 09-18-2021 at 08:55 AM.