Made a tour pak relocator
#31
04-05-2012, 11:12 PM
Thanks kc classic for your design, DH and his buddy moved the tour pak back today on our new 12 Ultra using your design and I love it !! We moved the tour pak back on the old 03 Ultra with a couple of plates, but they wouldn't work on the new bike. DH is 6'6" and I'm 5'8" so the farther I can get back, the more he can stretch out and I get more hip to knee room. Funny thing, the stock seat on the '03 was much more comfortable than the '12 seat, guess HD assumes you will buy a new seat....guess that's next....
Picked the new bike up March 17th and 1100+ miles on it already...can't wait for summer trips....
Picked the new bike up March 17th and 1100+ miles on it already...can't wait for summer trips....
#32
05-18-2012, 05:05 PM
#33
06-24-2012, 03:42 PM
Cruiser
#36
12-11-2012, 06:46 PM
just reposted the pics that had been deleted. Hope this helps someone out.
http://harleytalking.com/showthread....Pak-Move/page7
here is a link to another forum where my design is drawn with a cad system.
http://harleytalking.com/showthread....Pak-Move/page7
here is a link to another forum where my design is drawn with a cad system.
Last edited by kc classic; 12-11-2012 at 06:56 PM.
#37
12-11-2012, 09:00 PM
Road Warrior
We already have a patent pending on this. 
It is a very solid design, over 1000 installed world wide over the last several years.
http://www.dkcustomproducts.com/Tour-Pak-Kits_c5.htm
OP, nice work. We use polished stainless in a very similar design, but the aluminum should work well for you. You passenger is going to LOVE it.
It is a very solid design, over 1000 installed world wide over the last several years.
http://www.dkcustomproducts.com/Tour-Pak-Kits_c5.htm
OP, nice work. We use polished stainless in a very similar design, but the aluminum should work well for you. You passenger is going to LOVE it.
Nice work to the op and thanks for the measurements.
Rob
#38
12-11-2012, 10:03 PM
Cruiser
Join Date: Nov 2011
Location: Pendleton Oregon
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
#39
12-11-2012, 10:05 PM
#40
12-11-2012, 11:07 PM
Hello all, here a few pics of the tour pak relocator plate I made. I already had the alum plate and added 2.20 worth of ss hardware.
Disclaimer: I made this for my 2011 ultraclassic. It works for me. I do not take any responsibility for anyone making one for their own bike.
Disclaimer: I made this for my 2011 ultraclassic. It works for me. I do not take any responsibility for anyone making one for their own bike.
KC
Thanks for the post and effort. I was looking for a way to move things around and you just did most of the work.
I will have mine made from 6061 and than black anodized with some of my parts I have made for my business.
