Road King w/BDL 3" open belt
#1
Road King w/BDL 3" open belt
Finaly did it.
I didn't want to (totally) relocate the footboards or replace the stock foot controls with a 'forward' set-up...so I had a shift pivot fabricated & welded to a new BDL backplate so I could run a 3" Open Belt drive.
I have searched on-line quite a bit..and I have yet to find another set-up like it. So. Thought I would share.
Still working on a custom heel shifter, but that should be a pretty easy fix.
EDIT: Link to video was jankey...
Trying again.
Yep - For video, click ---> http://s151.photobucket.com/user/uni..._0645.mp4.html
I didn't want to (totally) relocate the footboards or replace the stock foot controls with a 'forward' set-up...so I had a shift pivot fabricated & welded to a new BDL backplate so I could run a 3" Open Belt drive.
I have searched on-line quite a bit..and I have yet to find another set-up like it. So. Thought I would share.
Still working on a custom heel shifter, but that should be a pretty easy fix.
EDIT: Link to video was jankey...
Trying again.
Yep - For video, click ---> http://s151.photobucket.com/user/uni..._0645.mp4.html
Last edited by Jumpman; 05-12-2013 at 08:01 AM. Reason: new links
#3
Thanks.
Just picked the bike up yesterday, so didn't really get to put miles on it until today.
Clutch is WAY stiffer than the stock set-up, but it builds power far quicker. The sound is all sorts of cool.
I'm pretty pleased with the project overall.
Just need to find time to get the heel shifter reworked.
Just picked the bike up yesterday, so didn't really get to put miles on it until today.
Clutch is WAY stiffer than the stock set-up, but it builds power far quicker. The sound is all sorts of cool.
I'm pretty pleased with the project overall.
Just need to find time to get the heel shifter reworked.
#5
#7
Trending Topics
#9
l will try to snap some more pics tomorrow..it was too dark to get any good ones tonight.
Here's a longer video though: http://s151.photobucket.com/user/uni..._0644.mp4.html
We ended-up welding an aluminum front shiter pivot to the BDL backplate. Steel sleeves were pressed-in to prevent wear...and grease fitting was put on to allow for lube.
Dry fitting/mock-up
Almost compete:
A few closer pics:
Bikes...mine & my Pop's sleds:
Here's a longer video though: http://s151.photobucket.com/user/uni..._0644.mp4.html
We ended-up welding an aluminum front shiter pivot to the BDL backplate. Steel sleeves were pressed-in to prevent wear...and grease fitting was put on to allow for lube.
Dry fitting/mock-up
Almost compete:
A few closer pics:
Bikes...mine & my Pop's sleds: