Let the modding begin......
Thread Starter
|
Stellar HDF Member
Joined: Jan 2013
Posts: 2,012
Likes: 53
From: Myrtle Beach,SC
Let the modding begin......
All This.......
For this.....
INstalled Wild Pig Slip Ons
and Harley Trickle Charge pig Tail with red light indicator for low battery
Lowers
On the way
Rear Rack , Sissy bar and back rest from Ebay, Windshield bag, Drink Holder.....
For this.....
INstalled Wild Pig Slip Ons
and Harley Trickle Charge pig Tail with red light indicator for low battery
Lowers
On the way
Rear Rack , Sissy bar and back rest from Ebay, Windshield bag, Drink Holder.....
Last edited by TenMidgets; Mar 14, 2014 at 10:34 PM.
Thread Starter
|
Stellar HDF Member
Joined: Jan 2013
Posts: 2,012
Likes: 53
From: Myrtle Beach,SC
Too old for this shiyte...Sore as hell....
The Nacelle removal was a biatch as well as that little nut way up in there to removed the trim strip covering the split. Had to remove the Nacell to access the left switch which switches the Battery gauge and the USB/12V port (that has it's own switch.
Getting it all back together was not any easier as mounting holes for the passing lamps were not lining up and the cover for fork lock asy was not lining up. Had to loosen everything a few times to get everything back in place......
Next week the head light comes off for the Modulator from Comagination.
Wild Pigs were another issue as the stock flange would not work without pounding it on the end f the pipe with a mallet.Also there is no indentation where the rear axle is. Hope that doesn't create issues. For $184 they sound just right,
Swapped out the tall Windshield for the mid range one at HD. I don;t like looking through a windshield....2" over the top is fine.
Hoping the Kuryakyn lowers work. read good things about them.
Once I get the rear mounts I should be done, Maybe look for a used back rest on CL or Ebay. ......and maybe some longer Floor boards........and......
The Nacelle removal was a biatch as well as that little nut way up in there to removed the trim strip covering the split. Had to remove the Nacell to access the left switch which switches the Battery gauge and the USB/12V port (that has it's own switch.
Getting it all back together was not any easier as mounting holes for the passing lamps were not lining up and the cover for fork lock asy was not lining up. Had to loosen everything a few times to get everything back in place......
Next week the head light comes off for the Modulator from Comagination.
Wild Pigs were another issue as the stock flange would not work without pounding it on the end f the pipe with a mallet.Also there is no indentation where the rear axle is. Hope that doesn't create issues. For $184 they sound just right,
Swapped out the tall Windshield for the mid range one at HD. I don;t like looking through a windshield....2" over the top is fine.
Hoping the Kuryakyn lowers work. read good things about them.
Once I get the rear mounts I should be done, Maybe look for a used back rest on CL or Ebay. ......and maybe some longer Floor boards........and......
Seasoned HDF Member
Joined: Sep 2009
Posts: 25,292
Likes: 2,427
From: Eastern NE
Don't see any beer can carcasses sitting around there so you must be working with a clear mind...
Great job on the mods - keep it up!
Great job on the mods - keep it up!
Trending Topics
Op the mods look good