Harley Davidson Forums
0 2024/04/09 05:31:50
Dynojet has not answered my questions about what config3 Bit0 and Bit1 is.
Dynojet has not answered my questions about what config3 Bit0 and Bit1 is.
0 2024/05/05 02:17:09
The config2 window.
The config2 window.
0 2024/05/05 02:17:15
I hade to use a Dremel.
I hade to use a Dremel.
0 2024/05/30 08:17:28
Drag Specialties Alternator Rotor 38A Rotor 06 Fxd Oe 40356-06
Drag Specialties Alternator Rotor 38A Rotor 06 Fxd Oe 40356-06
0 2024/07/25 16:45:53
Text side
Text side
0 2024/08/01 10:39:16
Non text side
Non text side
0 2024/08/01 10:39:19
The chain is tensed and the play under the Hayden shoe is 7-8 mm.
The chain is tensed and the play under the Hayden shoe is 7-8 mm.
0 2024/08/13 12:49:41
0 2024/08/31 09:53:17
It seems to me that the original wires are pretty much normal, but that the wires I bougth from the dealer, which sit on the bike now, are not.
It seems to me that the original wires are pretty much normal, but that the wires I bougth from the dealer, which sit on the bike now, are not.
0 2024/08/31 09:17:23
0 2024/12/21 16:13:51
0 2024/12/09 14:02:59
0 2024/12/25 13:25:20
0 2025/01/03 07:14:41
0 2024/12/21 16:53:42
0 2024/12/21 16:53:53
0 2024/12/21 16:14:05
0 2024/12/21 16:04:26
0 2024/12/21 16:04:11
0 2024/12/21 16:01:58
0 2024/12/21 16:01:23
0 2025/01/03 08:02:50
0 2025/02/10 20:58:01
0 2025/02/11 09:53:14
This is my stock automatic tensioner, prepared with a stainless steel zip tie.
This is my stock automatic tensioner, prepared with a stainless steel zip tie.
0 2025/02/11 09:55:42
0 2025/02/16 20:15:45
This how I finally did it. JB Cold Weld.
This how I finally did it. JB Cold Weld.
0 2025/02/22 15:59:19
0 2025/02/18 12:02:14
0 2025/02/16 20:25:57
0 2025/02/16 20:19:11
0 2025/03/08 15:47:33
Here are the results in mm.
Here are the results in mm.
0 2025/03/02 20:07:23
Front wheel not centered between the light green strings
Front wheel not centered between the light green strings
0 2025/03/02 20:02:37
Rear wheel, not straight
Rear wheel, not straight
0 2025/03/02 20:02:32
Front wheel straight
Front wheel straight
0 2025/03/02 20:02:27
Frame straight.
Frame straight.
0 2025/03/02 20:02:23
0 2025/03/02 20:02:16
0 2025/03/08 15:36:45
This how it looks now. If the play would increase in the future, I will dremel that JB Cold Weld off, redo the adjustment and JB weld it again.
This how it looks now. If the play would increase in the future, I will dremel that JB Cold Weld off, redo the adjustment and JB weld it again.
0 2025/03/02 05:20:54
0 2025/03/02 05:19:45
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
© 2026 MH Sub I, LLC dba Internet Brands