Harley Davidson Forums
0 2020/08/25 05:27:24
0 2020/08/26 18:34:06
0 2020/08/30 10:32:54
0 2020/08/30 11:13:55
0 2020/09/05 16:58:27
0 2020/09/06 09:53:01
0 2020/09/06 10:08:41
0 2020/09/06 16:53:54
0 2020/09/16 05:25:57
0 2020/09/16 16:39:07
0 2020/09/17 09:41:37
0 2021/08/07 16:22:56
0 2021/08/13 13:15:10
0 2021/08/13 13:17:41
0 2021/08/15 06:17:15
So I improvised but ya would need a good cutoff blade and grinder.🤷‍♂️😂
So I improvised but ya would need a good cutoff blade and grinder.🤷‍♂️😂
0 2021/08/16 09:58:22
0 2021/08/16 10:19:44
0 2021/08/20 10:13:16
This was opened like this when I cut it apart from the rod and hammer. You can tell when you hit the cat.
This was opened like this when I cut it apart from the rod and hammer. You can tell when you hit the cat.
0 2021/08/25 10:22:48
Here is catalyst. Goes in right past the taper and is 3 to 4 inches in.
Here is catalyst. Goes in right past the taper and is 3 to 4 inches in.
0 2021/08/25 10:23:28
Heatshield covers all up.
Heatshield covers all up.
0 2021/08/25 10:24:01
0 2021/08/25 10:36:43
0 2021/08/27 16:17:34
0 2021/08/27 16:17:58
0 2021/09/05 16:15:19
Think these OEM bars are abut 3" up so adding about 5" overall.
Think these OEM bars are abut 3" up so adding about 5" overall.
0 2021/09/13 18:18:37
Definitely going to a 140 or 150 on front when I replace tire. 150 on back now.
Definitely going to a 140 or 150 on front when I replace tire. 150 on back now.
0 2021/09/14 00:37:56
0 2021/09/14 14:37:16
0 2021/09/15 05:44:09
0 2021/09/15 05:44:58
There is no where that I cannot run my fingers around tire between fender. I will have a 170 on her rear next go around 160 minimum. Front wheel is stock size (130/90/16) but I will definitely have a fatter front tire when I replace. A 150 on front would still have 10mm clearance on each side easy.
There is no where that I cannot run my fingers around tire between fender. I will have a 170 on her rear next go around 160 minimum. Front wheel is stock size (130/90/16) but I will definitely have a fatter front tire when I replace. A 150 on front would still have 10mm clearance on each side easy.
0 2021/09/15 05:46:15
0 2021/09/16 05:34:39
0 2021/09/16 19:30:40
0 2021/09/17 06:38:58
0 2021/09/17 16:19:58
Yep! My pipes colored just 10 miles into stage 1 tune with AC change and pipes opened up "straight thru" other than this blockage. During stage 1 upgrade I immediately removed my heat shields to watch for heat indicators (none at this time and 3k on bike with no mods). Then I removed the blockage as shown welded back together and sanded away the color (chrome heatshields cover it all anyway). Then after 300 miles and no coloring, I reinstalled my covers. And HD and others say NO restrictions.
Yep! My pipes colored just 10 miles into stage 1 tune with AC change and pipes opened up "straight thru" other than this blockage. During stage 1 upgrade I immediately removed my heat shields to watch for heat indicators (none at this time and 3k on bike with no mods). Then I removed the blockage as shown welded back together and sanded away the color (chrome heatshields cover it all anyway). Then after 300 miles and no coloring, I reinstalled my covers. And HD and others say NO restrictions.
0 2021/09/19 06:14:37
0 2021/10/23 08:36:32
0 2021/10/23 08:42:42
0 2021/10/23 08:53:49
0 2021/10/23 08:54:02
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
© 2026 MH Sub I, LLC dba Internet Brands