Harley Davidson Forums
0 2015/05/19 11:56:03
0 2015/05/19 18:00:55
0 2015/05/19 18:02:06
0 2015/05/28 18:35:56
0 2015/06/04 11:00:52
0 2015/06/04 11:00:55
0 2015/06/04 11:04:04
0 2015/06/04 11:04:07
0 2016/03/02 11:26:24
0 2016/03/11 13:08:23
0 2016/03/19 12:56:32
Triple tree grounding point. Existing were the radio ground and jumper to the area behind where the bars are mounted The items I installed were the amp ground and 14 gauge jumper to frame,
Triple tree grounding point. Existing were the radio ground and jumper to the area behind where the bars are mounted The items I installed were the amp ground and 14 gauge jumper to frame,
0 2016/03/23 21:35:20
Pre-existing hole I taped for a 5/16x18 screw.
Pre-existing hole I taped for a 5/16x18 screw.
0 2016/03/23 21:35:24
Ground secured.
Ground secured.
0 2016/03/23 21:35:27
0 2016/07/14 11:41:39
0 2016/07/14 11:41:43
0 2016/09/14 20:32:40
0 2016/10/09 10:40:09
0 2017/05/17 21:36:19
0 2017/05/18 09:11:13
0 2017/05/18 16:27:54
0 2017/05/18 16:28:28
Battery before fuse block install.
Battery before fuse block install.
0 2017/07/21 20:04:02
The battery after connections were moved to the fuse block.
The battery after connections were moved to the fuse block.
0 2017/07/21 20:04:23
Perfect place to mount the fuse block which was under the left side cover below the seat. The battery is located just behind it.
Perfect place to mount the fuse block which was under the left side cover below the seat. The battery is located just behind it.
0 2017/07/21 20:10:12
0 2017/07/26 22:28:24
Would like to sell with the HU together. Amp mount - $15 shipped.
Would like to sell with the HU together. Amp mount - $15 shipped.
0 2017/12/07 21:23:47
CB module info
CB module info
0 2017/12/07 21:23:48
CB module info
CB module info
0 2017/12/07 21:23:49
CB module - $35 shipped
CB module - $35 shipped
0 2017/12/07 21:23:50
HU - $125 Shipped.
HU - $125 Shipped.
0 2017/12/07 21:23:53
I did not remove the Velcro from the bottom of the HU as it was removing the label so I left it in place.
I did not remove the Velcro from the bottom of the HU as it was removing the label so I left it in place.
0 2017/12/07 21:23:54
Console insert (fair condition) - $25 shipped
Console insert (fair condition) - $25 shipped
0 2017/12/07 21:23:57
Comms cable (connects under the seat and terminates at the console insert) - $15 shipped
Comms cable (connects under the seat and terminates at the console insert) - $15 shipped
0 2017/12/07 21:23:58
Soldering connections.
Soldering connections.
0 2017/12/21 06:44:26
Soldering completed.
Soldering completed.
0 2017/12/21 06:44:29
Found the the power connection I wanted to use in the headlight wiring bundle and tested it out.
Found the the power connection I wanted to use in the headlight wiring bundle and tested it out.
0 2018/01/05 01:32:54
Mounted the homelink in the fairing with the 3M heavy duty velcro.
Mounted the homelink in the fairing with the 3M heavy duty velcro.
0 2018/01/05 01:32:56
This is the connector to the right of the radio that I would pull the wires from to use the PTT switch.
This is the connector to the right of the radio that I would pull the wires from to use the PTT switch.
0 2018/01/05 01:32:57
Molex 150 (I believe) male connector. I removed pins 13 violet/black, 14 orange/black, and 8 brown/black. I used a small needle nose to pull up on the inside plate to unlock it and a jewelers screw driver in to the holes of the wires I wanted to remove.
Molex 150 (I believe) male connector. I removed pins 13 violet/black, 14 orange/black, and 8 brown/black. I used a small needle nose to pull up on the inside plate to unlock it and a jewelers screw driver in to the holes of the wires I wanted to remove.
0 2018/01/05 01:32:58
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
© 2026 MH Sub I, LLC dba Internet Brands