Harley Davidson Forums
0 2016/07/20 11:15:00
0 2016/07/22 13:34:19
0 2016/07/22 13:35:17
0 2016/07/22 13:35:42
0 2016/07/22 13:37:59
0 2016/07/23 04:24:21
Couple of beads welded around the upper race.
Couple of beads welded around the upper race.
0 2019/12/29 16:58:46
Old race on the bench!
Old race on the bench!
0 2019/12/29 16:59:49
This is the stock pin. I forgot to take pix of this part of the process, but it's very straightforward.
This is the stock pin. I forgot to take pix of this part of the process, but it's very straightforward.
0 2019/12/29 17:08:37
0 2019/12/29 17:12:20
0 2019/12/29 17:13:39
0 2019/12/29 17:23:02
Adapters attached without cowbells.
Adapters attached without cowbells.
0 2019/12/29 18:58:10
Screw hole for cowbell obscured by lower clamp.
Screw hole for cowbell obscured by lower clamp.
0 2019/12/29 18:59:20
0 2019/12/29 19:00:35
Drilling cowbell
Drilling cowbell
0 2019/12/29 19:01:35
Cowbell fastened to adapters, with attaching screws captured. The hex is visible in the drilled holes.
Cowbell fastened to adapters, with attaching screws captured. The hex is visible in the drilled holes.
0 2019/12/29 19:02:55
Cowbells attached.
Cowbells attached.
0 2019/12/29 19:04:33
Boring the fork stop donuts on the lathe.
Boring the fork stop donuts on the lathe.
0 2019/12/29 19:17:57
Top clamp with All Balls bearing seal installed.
Top clamp with All Balls bearing seal installed.
0 2019/12/29 19:22:33
Triple trees with cowbells and handlebars installed.
Triple trees with cowbells and handlebars installed.
0 2019/12/29 19:23:14
Preload spacer
Preload spacer
0 2020/02/17 17:44:36
Damper rod with teflon seal, top out spring and oil lock piece
Damper rod with teflon seal, top out spring and oil lock piece
0 2020/02/17 17:45:52
Damper rod installed in fork tube. Not much protrudes, only about half.
Damper rod installed in fork tube. Not much protrudes, only about half.
0 2020/02/17 17:47:05
Special tool fork seal and bushing driver with tube and slider assembly ready to go. Note the sanded top half inch or so of the PVC.
Special tool fork seal and bushing driver with tube and slider assembly ready to go. Note the sanded top half inch or so of the PVC.
0 2020/02/17 17:51:25
Fork seal ready to get driven home. The bushing and retainer washer are already in there.
Fork seal ready to get driven home. The bushing and retainer washer are already in there.
0 2020/02/17 17:53:29
Ready....
Ready....
0 2020/02/17 17:55:10
Smack! A sharp hit on the floor, and...
Smack! A sharp hit on the floor, and...
0 2020/02/17 17:56:42
The seal is in place. Hard to see in this pic, but the groove for the retaining ring is visible.
The seal is in place. Hard to see in this pic, but the groove for the retaining ring is visible.
0 2020/02/17 17:58:33
Retainer ring
Retainer ring
0 2020/02/17 18:02:02
Gold Valve
Gold Valve
0 2020/02/17 18:03:39
Gold Valve in its place on top of the damper rod.
Gold Valve in its place on top of the damper rod.
0 2020/02/17 18:05:15
Preload spacer installed with preload washer on top.
Preload spacer installed with preload washer on top.
0 2020/02/17 18:07:52
Spacer, washer and fork tube cap. Preload is measured from the top of the fork tube to the underside of the tube cap's top sealing surface. This is the distance the spring will be compressed when the cap is threaded all the way down and tightened.
Spacer, washer and fork tube cap. Preload is measured from the top of the fork tube to the underside of the tube cap's top sealing surface. This is the distance the spring will be compressed when the cap is threaded all the way down and tightened.
0 2020/02/17 18:10:10
0 2020/02/17 18:13:31
0 2020/02/17 18:32:15
0 2020/02/17 18:36:24
ABS spacer
ABS spacer
0 2020/02/22 05:53:09
Damper rod with seal, top out spring and oil lock piece
Damper rod with seal, top out spring and oil lock piece
0 2020/02/22 05:53:58
Damper rod and related parts assembled into the fork tube
Damper rod and related parts assembled into the fork tube
0 2020/02/22 05:55:06
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
© 2026 MH Sub I, LLC dba Internet Brands