Harley Davidson Forums
0 2026/04/05 14:56:28
Put the torque plate on the engine and frame
Put the torque plate on the engine and frame
0 2026/04/05 14:56:38
The crud on it almost like a barn find !
The crud on it almost like a barn find !
0 2026/04/07 18:24:46
0 2026/04/07 18:25:35
Definity dirty
Definity dirty
0 2026/04/07 18:25:58
Getting it cleaned
Getting it cleaned
0 2026/04/07 18:26:31
Had to take it off my table to put the forks on it
Had to take it off my table to put the forks on it
0 2026/04/07 18:27:19
Well got the front end on and that was a challenge by yourself . Not bad for a 71 one year old guy ! LOL
Well got the front end on and that was a challenge by yourself . Not bad for a 71 one year old guy ! LOL
0 2026/04/07 18:33:27
at lease they didn't disconnect all the wires
at lease they didn't disconnect all the wires
0 2026/04/11 16:52:25
Everty thing is so beat up
Everty thing is so beat up
0 2026/04/11 16:52:39
more connector blocks
more connector blocks
0 2026/04/11 16:54:27
looking for the little clip for the cable and have to get a gasket for the clutch cover and had to sand out the nicks and polish it up and finally found the clip !
looking for the little clip for the cable and have to get a gasket for the clutch cover and had to sand out the nicks and polish it up and finally found the clip !
0 2026/04/11 16:55:20
Getting the exhaust to the turbo polished and put back on with new gaskets
Getting the exhaust to the turbo polished and put back on with new gaskets
0 2026/04/11 16:57:15
0 2026/04/11 16:58:20
Getting the turbo back in it's spot and hooking up the exhaust pipe
Getting the turbo back in it's spot and hooking up the exhaust pipe
0 2026/04/11 17:04:36
Well got the pipe on and cleaned up . Got the cluch cover on and hooked up ,but have to re route the cable .
Well got the pipe on and cleaned up . Got the cluch cover on and hooked up ,but have to re route the cable .
0 2026/04/11 17:05:53
The orignal mirrors got broke and was digging in the cabinets and found these mirrors still in the boxes never opened .
The orignal mirrors got broke and was digging in the cabinets and found these mirrors still in the boxes never opened .
0 2026/04/11 17:07:47
I'm thinking there probaly going to be hard to see out of, but they look good !Plus they are free at this point ! Lol
I'm thinking there probaly going to be hard to see out of, but they look good !Plus they are free at this point ! Lol
0 2026/04/11 17:10:39
My buddy says he hasn't seen those mirrors in years and I kinda look but didn't find them . Think they where from Cal Custom But again it's been 25 plus years in the cabinet .
My buddy says he hasn't seen those mirrors in years and I kinda look but didn't find them . Think they where from Cal Custom But again it's been 25 plus years in the cabinet .
0 2026/04/11 17:12:08
0 2026/04/11 17:17:27
0 2026/04/11 17:18:05
So going to cut it off as have to do touch up anyway so going for a different look.
So going to cut it off as have to do touch up anyway so going for a different look.
0 2026/04/11 17:18:28
Ok the bar and signals are cut off
Ok the bar and signals are cut off
0 2026/04/11 17:19:43
Welded the new brackets in the fender that I made as the bolts come in at a forty five degree angle as my fender is a lot wider than the stock fender as you will see the turn signal bar i'm going to use
Welded the new brackets in the fender that I made as the bolts come in at a forty five degree angle as my fender is a lot wider than the stock fender as you will see the turn signal bar i'm going to use
0 2026/04/11 17:20:44
I like it
I like it
0 2026/04/11 17:22:42
Have to do some body work and paint work but it is what it is !
Have to do some body work and paint work but it is what it is !
0 2026/04/11 17:24:47
I had some chrome red covers that I was going to use on one of my hot rods but didn't like them on it but I like them on it. I like the little red side ring .
I had some chrome red covers that I was going to use on one of my hot rods but didn't like them on it but I like them on it. I like the little red side ring .
0 2026/04/11 17:26:03
rear tire at the time was the widest you could get back in the day 1995 Frame was made by Atlas Pro Magnum in Apple Valley ,California .
rear tire at the time was the widest you could get back in the day 1995 Frame was made by Atlas Pro Magnum in Apple Valley ,California .
0 2026/04/11 17:26:26
The Turbo was from Aero Charger
The Turbo was from Aero Charger
0 2026/04/11 17:26:46
Front forks are from Arlen Ness
Front forks are from Arlen Ness
0 2026/04/11 17:27:07
I painted this on back in 1997 and I 'm going to keep it on the rear fender !
I painted this on back in 1997 and I 'm going to keep it on the rear fender !
0 2026/04/11 17:29:42
Taken off more of years of crud sitting like a barn find !
Taken off more of years of crud sitting like a barn find !
0 2026/04/13 18:33:23
0 2026/04/13 18:34:10
Putting the rear shocks on with the lowering kit. But as usual should only take a half hour to put in ! But they striped the front threads as I'm sure when they took them out that it had weight on it as it pulled the threads on the frame ! 3 hours later making a short tap and re taping out the threads .
Putting the rear shocks on with the lowering kit. But as usual should only take a half hour to put in ! But they striped the front threads as I'm sure when they took them out that it had weight on it as it pulled the threads on the frame ! 3 hours later making a short tap and re taping out the threads .
0 2026/04/13 18:34:44
one shock on to the left and working on the other one !But patience as it getting there and I'm happy the way it looks
one shock on to the left and working on the other one !But patience as it getting there and I'm happy the way it looks
0 2026/04/13 18:37:37
Sits pretty good as waiting on the front controls and master cylinder so I can take it off the lift so I can put the kick stand on !
Sits pretty good as waiting on the front controls and master cylinder so I can take it off the lift so I can put the kick stand on !
0 2026/04/13 18:39:06
0 2026/04/13 18:41:07
Had to strip the paint off the dash as it had to many deep scratches in it
Had to strip the paint off the dash as it had to many deep scratches in it
0 2026/04/19 14:36:54
Fixing all the scrathes and chips and dents in the parts
Fixing all the scrathes and chips and dents in the parts
0 2026/04/19 14:37:51
more repair
more repair
0 2026/04/19 14:38:36
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
© 2026 MH Sub I, LLC dba Internet Brands