Harley Davidson Forums
0 2016/02/22 08:14:31
0 2016/02/22 08:16:55
0 2016/02/22 08:18:21
0 2016/04/25 12:49:54
0 2016/04/26 07:57:27
0 2016/04/27 09:50:00
0 2016/06/17 06:53:51
Before:
Before:
0 2016/06/24 09:10:17
After:
After:
0 2016/06/24 09:11:30
Note the creative plug wire route.
Note the creative plug wire route.
0 2016/06/24 09:12:05
Plug wire and harness routed correctly along underside of backbone
Plug wire and harness routed correctly along underside of backbone
0 2016/06/24 10:11:09
0 2016/06/24 14:13:30
0 2016/07/05 07:45:23
0 2016/07/06 06:56:36
0 2016/07/12 13:15:38
0 2016/07/25 14:58:31
These guys rode across the US in 30 days sponsored by Honda... Never published how many bike changes were required.
These guys rode across the US in 30 days sponsored by Honda... Never published how many bike changes were required.
1 2016/08/12 09:40:34
0 2016/08/30 07:27:55
2" left and right.
2" left and right.
0 2016/08/30 12:33:33
Shot of the service manual showing a block of wood for a prop.
Shot of the service manual showing a block of wood for a prop.
0 2016/09/05 15:34:47
Propped by a wood block, as shown in the service manual.
Propped by a wood block, as shown in the service manual.
0 2016/09/05 15:41:24
Example of cheap crap to which I was referring.
Example of cheap crap to which I was referring.
0 2016/09/06 11:29:39
An example of "cheap crap"
An example of "cheap crap"
0 2016/09/06 11:31:42
Cheap crap
Cheap crap
0 2016/09/06 11:34:14
0 2016/09/06 11:35:55
As shipped: EMPI #9044 from Dune Buggy Warehouse, about 20$ shipped. Cut the extra bits off the back, and plugged the emissions port with a 1/2" chrome furniture plug. Drilled the 3 5/16" holes for mounting to the throttle body.
As shipped: EMPI #9044 from Dune Buggy Warehouse, about 20$ shipped. Cut the extra bits off the back, and plugged the emissions port with a 1/2" chrome furniture plug. Drilled the 3 5/16" holes for mounting to the throttle body.
0 2016/10/09 17:51:28
As shipped: EMPI #9044 from Dune Buggy Warehouse, about 20$. Cut the back flat, and plugged the emissions hole with a 1/2" chrome furniture plug. Drilled 3 5/16" holes using carb bracket for pattern.
As shipped: EMPI #9044 from Dune Buggy Warehouse, about 20$. Cut the back flat, and plugged the emissions hole with a 1/2" chrome furniture plug. Drilled 3 5/16" holes using carb bracket for pattern.
0 2016/10/09 17:59:29
As shipped. EMPI#9044 from Dune Buggy Warehouse, about 20$ shipped. Back plate trimmed flat and plugged emissions hole with a 1/2" chrome furniture plug.
As shipped. EMPI#9044 from Dune Buggy Warehouse, about 20$ shipped. Back plate trimmed flat and plugged emissions hole with a 1/2" chrome furniture plug.
0 2016/10/09 18:13:08
Hate too much chrome, so I spun it in a drill with scuff pad to give it a turned look.
Hate too much chrome, so I spun it in a drill with scuff pad to give it a turned look.
0 2016/10/09 18:16:24
Installed, along with DK Outlaw Breather Bolts.
Installed, along with DK Outlaw Breather Bolts.
0 2016/10/09 18:18:34
0 2016/10/19 14:08:44
0 2016/10/22 19:02:13
0 2016/11/06 08:03:58
0 2016/11/08 11:31:44
0 2016/11/16 12:41:38
0 2016/12/04 19:55:41
0 2016/12/08 07:04:32
0 2016/12/08 07:06:43
0 2016/12/14 10:42:04
0 2016/12/14 13:34:20
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
© 2026 MH Sub I, LLC dba Internet Brands