Harley Davidson Forums
0 2016/04/01 20:04:02
0 2016/04/05 13:44:51
0 2016/04/05 13:46:08
0 2016/04/11 09:47:42
0 2016/05/14 09:03:59
0 2016/05/14 09:05:37
0 2016/05/15 08:23:35
0 2016/05/15 08:24:59
0 2016/05/22 08:55:28
0 2016/05/22 08:56:03
0 2016/06/03 08:07:55
0 2016/06/03 08:11:49
0 2016/06/05 10:55:02
0 2016/06/05 10:56:40
0 2016/10/23 16:12:01
0 2016/10/29 19:55:08
I wound up getting other side bag as well.
I wound up getting other side bag as well.
0 2016/11/03 07:45:50
0 2016/11/03 07:47:01
0 2016/11/04 07:07:08
0 2016/11/04 07:08:34
0 2016/11/04 07:09:34
Viking bag
Viking bag
0 2016/11/04 07:10:25
Bad&G bags.
Bad&G bags.
0 2016/11/04 07:11:44
0 2016/12/20 20:54:39
0 2016/12/20 21:00:34
0 2016/12/20 21:01:38
0 2017/01/16 14:26:52
How she started. Only mods were V&H Longshots, SE AC, and I had to go in and "tweak" the carb (needle and jet kit).
How she started. Only mods were V&H Longshots, SE AC, and I had to go in and "tweak" the carb (needle and jet kit).
0 2017/01/16 14:46:23
Bought stock with V&H longshots and SE aircleaner. I had to tweak carb to tune properly (needle and re jet)
Bought stock with V&H longshots and SE aircleaner. I had to tweak carb to tune properly (needle and re jet)
0 2017/01/16 14:48:34
After 1st 1000 mile trip, added bags, taller sissy bar, HD Quarter Fairing (huge pain to make fit), and Mustang wide touring seat.
After 1st 1000 mile trip, added bags, taller sissy bar, HD Quarter Fairing (huge pain to make fit), and Mustang wide touring seat.
0 2017/01/16 14:50:09
Next up. Ultra added to stable, so mods begin. Bassani Road Rage 2, Mustang Fastback seat, Bad&G bags, and a custom made Sissy bar on the way.
Next up. Ultra added to stable, so mods begin. Bassani Road Rage 2, Mustang Fastback seat, Bad&G bags, and a custom made Sissy bar on the way.
0 2017/01/16 14:54:33
Modified faring to fit my HG pouch from my windshield. And pic with sissy bar and old Ultra.
Modified faring to fit my HG pouch from my windshield. And pic with sissy bar and old Ultra.
0 2017/01/16 14:59:55
And here is all the parts for the tensioner upgrade, bearing change, new oil pump and cam. This was much needed as the original cam shoes were worn thru at 29k. Must say after retune on carb, did not need steppes down/up jets, just raised idle a bit, the bike is a bigger joy to ride.
And here is all the parts for the tensioner upgrade, bearing change, new oil pump and cam. This was much needed as the original cam shoes were worn thru at 29k. Must say after retune on carb, did not need steppes down/up jets, just raised idle a bit, the bike is a bigger joy to ride.
0 2017/01/16 15:02:50
And how my stable looks like now. Dyna is done for now...until I get another dumb thought of changing her up again:)
And how my stable looks like now. Dyna is done for now...until I get another dumb thought of changing her up again:)
0 2017/01/16 15:09:15
I have matching bag on the other side. Been running them for about a uear already; no issies with rubbing on belt guard or axle nuts.
I have matching bag on the other side. Been running them for about a uear already; no issies with rubbing on belt guard or axle nuts.
0 2017/01/16 16:00:15
3 Preload and 10 rebound adjustments.
3 Preload and 10 rebound adjustments.
0 2017/01/17 07:04:57
0 2017/03/22 18:55:23
0 2017/04/05 21:29:47
0 2017/04/05 21:36:49
0 2017/04/06 18:08:48
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
© 2026 MH Sub I, LLC dba Internet Brands